AMK-SOLAC Systems AG products

The premium high performance collectors for the maximum energy yield.

The premium high performance collectors for the maximum energy yield. During winter an in periods with lower solar irradiations often only 400W/m2 are available. The temperature differences between collector and outside are very high. In the chart below you will find out how the energy performance of the collector changes according to the solar irradiation and temperature differences. The values are considered under direct irradiation.

The single family house specialist for high energy yield throughout the whole year. During winter an in periods with lower solar irradiations often only 400W/m2 are available. The temperature differences between collector and outside are very high. In the chart below you will find out how the energy performance of the collector changes according to the solar irradiation and temperature differences. The values are considered under direct irradiation.

The affordable universal collector with maximum active absorber surface. During winter an in periods with lower solar irradiations often only 400W/m2 are available. The temperature differences between collector and outside are very high. In the chart below you will find out how the energy performance of the collector changes according to the solar irradiation and temperature differences. The values are considered under direct irradiation.

Good performance – even better pricing. The collector for when it matters. During winter an in periods with lower solar irradiations often only 400W/m2 are available. The temperature differences between collector and outside are very high. In the chart below you will find out how the energy performance of the collector changes according to the solar irradiation and temperature differences. The values are considered under direct irradiation.

Prepared for installation of pump groups (spacing 125 mm) with expansion tank. Large heat exchanger surfaces. sealed, high-performance bare-tube heat exchanger (limescale resistant). enamelling and mg anode in accordance with din 4753. High-quality Pu insulation, 100% cfc- and Hcfc-free, 50 mm. upward outflow of hot water ensures complete ventilation. factory-mounted thermometer, blank flange and flange insulating cover. all storage tanks include 1½‘‘ screw-in sleeve (factory-sealed), can be retrofitted with sH-series screw-in heater. variable sensor positioning (sensor channel). foil jacket included to reduce stock inventory (available in 7 colours). Height-adjustable feet (included).