ATTSU TERMICA S.L. products

The H boiler is a steam boiler that is horizontal, fire-tube with three passes and steam chamber. The chamber is completely cooled by boiler water. With steam production from 2 t/h to 50 t/h and thermal power from 1,500 kW to 32.500 kW.

The RL is a horizontal fire-tube with three passes reverse flame steam boiler. The combustion chamber is completely cooled by boiler water. With steam production from 50 to 5.000 Kg/h. and thermal power from 38 kW to 3.793 kW.

Fire tube steam boiler with low NOx emissions (< 100 mg/Nm3) and 400V electrical heating. With up to 50% of electric steam generation With steam production from 2 t/h to 50 t/h and thermal power from 1,500 kW to 32.500 kW. With up to 50% of electric steam generation.

Fire tube steam boiler with low NOx emissions (< 100 mg/Nm3) and 400V electrical heating. With up to 50% of electric steam generation. Steam production from 50 kg/h to 5,000 kg/h and thermal power from 30 kW to 3,500 kW. Production with electricity from 5% to 50% of total production.

The GE is an electric steam generator conceived for small consumption, installation in clean environments or supplying high purity steam. With steam production from 20 Kg/h (15 kW) to 4.500 Kg/h (3.000 kW). Thanks to the experience accumulated over more than 60 years as well as ongoing research, the GE boiler, as a consequence of its insulation of great thickness and high density has very little loss from radiation. ?Good accessibility for maintenance and checks due to the removable inspection box and removable panels. ?High amount of steam thanks to the steam chamber`s considerable volume and height, together with the addition of the interior drip trap.

The FT boiler is a thermal fluid generator, with vertical execution with three passes and high thermal efficiency. With power from 117 kW to 5,814 kW.

The FT boiler is a Thermal Fluid Generator, with horizontal execution with three passes and high thermal efficiency. With power from 466 kW to 5,814 kW.

The ATTSU FTE thermal fluid electric boiler uses electricity for thermal energy. It is transformed into heat by electrical resistances submerged in the thermal fluid with very high thermal performance and very fine working condition adjustments. Because they are easy to install and clean, they are ideal for use in laboratories.

The FT-PM boiler is a Thermal Fluid Generator, with Horizontal execution with three passes and high thermal efficiency. With power from 100 kW to 6.000 kW. Advanced combustion furnace and fully automatic operation. Appropriate to use the widest range of biomass, especially those whose combustion can produce slag (bark, forest trimmings, straw, etc.). They incorporate automatic feeding, ash removal and slag control depression at home and distribution of combustion air and recirculated gases at three levels, to increase performance.

The ASe is an electric superheated water boiler for small consumption, installation in clean environments or supplying. With production from 15 kW to 3.000 kW.