10 products found
CRISTEC Products
-
AC-DC Battery Chargers
-
CRISTEC - Model CPS3 - Battery Chargers
After more than 120,000 HF loaders sold worldwide, CRISTEC continues to market its range of high power CPS3 ...
-
CRISTEC - Model JBNUM-II - Digital Battery Monitor
CRISTEC presents its battery control accessory: the JBNUM-II battery monitor. The CRISTEC battery monitor is the only one on the market with a large graphic LCD display for optimum data reading: 62 x 44 mm (built-in backlight). Its version includes a 250A shunt to simultaneously control the voltage, amperage and remaining capacity of a battery bank (i.e.: servitude) as well as the voltage of two other battery banks (i.e., starting and ...
-
CRISTEC - Model CPS - Chargers
CPS chargers have replaced the very first HF battery chargers, NEMO, early 2000. Except small models that are still produced – 12V/06A, 12V/10A, 24V/03A and 24V/05A, we stopped the production of the other models at the end of ...
-
CRISTEC - Model Hpower Range - Automatic Battery Chargers
Specialized in the design and manufacturing of automatic battery chargers for more than 30 years, CRISTEC is launching high quality battery chargers for the toughest conditions for professional and recreational purposes : HPOWER. This new generation of battery chargers is designed to replace very popular CPS3 range. Available models will be : 12V/90A, 24V/45A, 24V/60A, 24V/80A, 24V/100A as well as some 48VDC and 3-phase ...
-
New Products
-
CRISTEC - Model YPO-Display-R - Touch-Screen Control Panel
CRISTEC proposes a brand new touch-screen control panel compatible with all YPOWER chargers and power units. Color and tactile, it has a high-definition reading facade (4.7 by ...
-
CRISTEC - Model YPOWER - Shore-Power Units
CRISTEC presents its 4th generation of YPOWER shore-power units combining AC distribution system & automatic battery charger in a single cabinet. The 12V charger is a brand new YPOWER model available either in 16, 25 or 40A with 3 fully isolated banks. It operates from 90 to 265VAC, 47 to 65Hz and delivers a smart 5-step charging curve for all battery types including LiFe ...
-
DC-AC Inverters
-
CRISTEC - Model SOLO 12V - Sine Wave Inverters
The aim of the inverters is to convert battery direct voltage into 230VAC/50Hz alternating current. 230VAC/60Hz or 115VAC/60Hz or 50Hz models are available on request. The SOLO inverters deliver a sinusoïdal wave identical to commercial mains supply. This signal type enables a wide scope of applications: computing equipment, lighting, Hi-Fi, domestic ...
-
CRISTEC - Model SOLO 24V - Sine Wave Inverters
The aim of the inverters is to convert battery direct voltage into 230VAC/50Hz alternating current. 230VAC/60Hz or 115VAC/60Hz or 50Hz models are available on request. The SOLO inverters deliver a sinusoïdal wave identical to commercial mains supply. This signal type enables a wide scope of applications: computing equipment, lighting, Hi-Fi, domestic equipment. They have been designed to withstand to high current peak in starting transient phase: ...
-
DC-DC Converters
-
CRISTEC - Model SD Range - Isolated DC/DC Converters
DC-DC converters can be used to increase or decrease the voltage, in order to powers electrical and electronic equipments. With a galvanic isolation between input and output, DC/DC converters are available in 12, 24 and 48V. They can operate as a battery charger: the charging voltage is adjustable by external potentiometer. Finally, there may be up to 3 converters in parallel to increase the available ...
-
Electronic Battery Isolators
-
CRISTEC - Model RCE - Electronic Battery Isolators
The RCE MOSFET electronic battery isolators are some electronic devices designed to direct the charging current to several batteries while preventing current from flowing from one battery to another. The DC input power source may be an alternator, a charger, a wind turbine, a solar panel, a hydrogenator, etc. The load distributors have a negligible voltage drop compared to conventional diode models which generate a drop of the order of ...