CS Combustion Solutions GmbH applications

Hydrogen is the fuel gas with the highest burning rate and flame temperature and was already a fuel used for energy by industry before the power to fuel trend. Often as a by-product from chlorine gas production or conventional H₂ steam reformers, where it is "contaminated" with other hydrocarbons, it is used to heat convection reformers. CS has been supplying burner systems for various concentrations of H₂ for all types of hydrogen production plants for over 10 years. Hydrogen has also always been an important fuel for the alternative combustion of steam boilers.

Claus plants are used to convert H₂S from natural gas and crude oil into liquid sulphur. For this purpose, the H₂S-containing waste gas (Claus gas) is burnt sub-stoichiometrically in several stages, depending on the process.

Hot process gas is required for the start-up or running of many production plants, in the refinery as well as in petrochemical plants and in the minerals industry. CS can offer hot gas generator systems for almost all applications. Many years of experience in the firing sector, as well as tailor-made solutions, which are tested for the most complex applications by using CFD, make it possible to supply optimum complete systems for the customer. No matter whether the process gas has to be provided at 100°C, 1000°C or at 8bar overpressure. Depending on the fuel, the SWP and SWB burner series are used in combination with hot gas generators made of brickwork or heat-resistant steel and double shell construction.

During the combustion of organic fuels with a high nitrogen content, NOx concentrations of up to several thousand mg or ppm are produced during a normal combustion process. The most efficient primary measure for NOx reduction is the staged combustion, where the combustion air is applied in two or more stages, depending on the application.