GARN products

The 49.5 kW sequencer includes: Two (3) Sequencer boxes (270 amp, 240V, Single Phase). Two Banks of 3 Breakers (30 amp each Breaker), pre-wired to a bank of time-delay relays. Three banks of time-delay relays allows for hookup to a maximum of 9 electric elements at 5.5 kW each. Hi Limit Switch (factory set at 190°F – NOT adjustable). Qty (18 + Extras) Crimp connectors for #10 stranded wire – a pair of crimp connectors is required for each element. The required 10 AWG wire from sequencer box to the elements is NOT included and must be provided by others.

The isolation bushings are designed to prevent undirected current from reaching the GARN tank. Included in the kit; Five (5)  high-temperature Nylon isolators. 5 Type B Washers (3/8″ ID, 1″ OD Flat Washer).

Replacement Filters for the Bypass/Side Stream unit are sold in packs of three (3). 5 micron, Stainless Steel Core, Filters are spun polyester with a SS core. These filters are to be used with the “Bypass/Side Stream” unit (P-0108) as described in the “BYPASS/SIDE-STREAM FILTER INSTRUCTIONS” section of the GARN Owners Manual(s).