INTERTEC products

Made of hot-pressed glass fibre reinforced polyester (GRP). Two-part construction, equipment can be installed in either the shallow or deep part. Stackable design for space saving storage and transport. Low flammability and self-extinguishing 4 mounting elements in stainless steel

Made of hot-pressed glass fibre reinforced polyester (GRP). Continuous double seal (a mechanical one in the form of a tongue and groove and another in the form of an inserted EPDM seal). Two-part construction, split diagonally, lower part for installation of equipment, upper part as lid. Stackable design for space saving storage and transport. Hardly inflammable and self-extinguishing

A small canopy with a bracket that allows it to attach directly onto the body of a transmitter (brackets for different instrument manufacturers available). Material: hot-pressed, glass fibre reinforced polyester. Colour: similar to RAL 7032 light grey, UV-resistant. Low flammability and self-extinguishing

Transmitter mounted underneath DIASHADE SD 37. DIASHADE SD 37 is mounted directly on a pipe stand. Diagonally sloping sides protect equipment from sun and UV radiation while leaving excellent access to the instrument - to read displays, actuate valves, etc. A choice of sizes provides solutions for single to triple transmitter installations.

Light-duty cabinets (IP65 as standard) for free-standing or wall-mounted applications. Available in sizes up to 2 m high, 1.3 m wide, 1 m deep. Double-walled GRP skins with PU foam cores provide excellent durability. C-rails offer excellent mounting flexibility. Underground vaults available.Reinforced glassfibre   polyester parts, sandwich construction, insulated with polyurethane foam core Textured surface in grey RAL 7032 Protection class IP 65

The MINITHERM CLA xx SF or CLA heater consists of a block with fins and a connection cable, which is heated by a PTC cartridge. The heat is transferred from the fins to the surrounding air. Ensure effective convection by observing the recommended clearances above and below the heater. Take care not to cover the fins.

The very versatile MICROTHERM line consists of electric heaters designed to heat the air in the enclosure by convection. Wherever possible, a heater designed for temperature class T3 should be selected. A temperature fuse is integrated in the heater that cuts off the power in case of a technical failure or excessive heating resulting from an external heat source. It should be noted that the temperature fuse must only be repaired in our factory. For reasons of operational safety the heater must only be operated under conditions that ensure that the trip temperature of the limiter will not be exceeded: