INTERTEC products

The MINITHERM CLA xx SF or CLA heater consists of a block with fins and a connection cable, which is heated by a PTC cartridge. The heat is transferred from the fins to the surrounding air. Ensure effective convection by observing the recommended clearances above and below the heater. Take care not to cover the fins.

The very versatile MICROTHERM line consists of electric heaters designed to heat the air in the enclosure by convection. Wherever possible, a heater designed for temperature class T3 should be selected. A temperature fuse is integrated in the heater that cuts off the power in case of a technical failure or excessive heating resulting from an external heat source. It should be noted that the temperature fuse must only be repaired in our factory. For reasons of operational safety the heater must only be operated under conditions that ensure that the trip temperature of the limiter will not be exceeded: