Körting Hannover AG products

These heaters are installed on the outside of a liquid tank using short liquid pipelines. The steam flowing through the nozzle is expanded so that a low-pressure zone is generated at the nozzle outlet. This causes the liquid in the tank to be sucked in. Steam condenses thereby heating the liquid which flows back into the tank via the mixed-flow line.

Climate protection and plant efficiency; Lack of resources and progressively increasing fuel prices – Climate protection and stricter environmental specifications. These are just a few of the challenges for which future economical solutions in the area of firing technology are required. The efficiency of technical firing plants gives operators competitive advantages and a winning margin.

A better technology to solve emission problems. Can be executed as a fan-assisted dust- / oil- / gas burner, Duoblock construction form, up to 75 MW.

Oil / Gas burner with blower in Monoblock construction form with digital firing management up to 16 MW.

These registers belonging to the LG-ZG series have been specially developed for use at melting pots in the glass industry and at dryers in the ceramics industry. The basic concept consists of the outer register with air connection, the core tube (flow rectifier) and the lance clamping and adjusting equipment. This air register burner is distinguished by the following main characteristics: Different lance elements promote its suitability for operation with fuel oils and combustion gases. Varying execution forms are available for operation with combustion air pre-heating temperatures of up to 800 °C.

Lance burners for use at melting pots in the glass industry

Parallel-flow lance burners for use at melting pots in the glass industry where stricter emission demands are to be met.

Lance burners for use at melting pots in the glass industry. Fuels: fuel oils EL, M or S acc. to DIN 51603.