LAMTEC America Inc. products

The BT300 BurnerTronic Series combustion controllers are specially designed for small commercial monobloc burner applications. Optional expansion modules enable systems to be individually configured to meet specific application requirements.

The CMS offers absolute flexibility in the design and control of your combustion control system. CMS incorporates up to 18 analogue inputs (or 9 failsafe), 41 digital outputs, 60 digital inputs, and 10 channels for actuator/drive control depending upon module hardware configuration. Internally, CMS can provide up to 16 individual fuel curves, each controlling up to 10 channels/actuators with 20 setpoints per channel on each channel curve, depending upon the chosen hardware/software configuration. A soft PLC side to the CMS that allows for non-failsafe user programmable functions that can be assigned to the I/O matrix within the CMS using Codesys PLC for additional input/output operations.

The BC300 is a simple burner sequencer for industrial burners in thermal process plants. Designed for burners of all sizes, it can be used on continuous or intermittent operation applications. Control output can be single stage or two stage, with pneumatic or in cycle modulation. Flame monitoring can be ionization with single or twin electrode operation, UV tube, or F152 with FFS07 or FFS08 optical sensors. BC300 is suitable for process application temperatures higher than 1382 degrees F. A comprehensive list of approvals ensures the BC300 is suitable for worldwide combustion applications.

Flame scanners that comply out of the box with NFPA 85 proof-of-flame requirements, that easily retrofit to existing mount tubes, that wire into existing BMS or other safety control systems with only 4 connections needed, means shortened conversion time, lower install cost. And with ruggedized in-unit electronics, the entire installation and commissioning is done simply at the point of physical connection to the burner saving even more time and money.

LAMTEC America’s all-in-one design in gas igniter solutions are the industry-leading solution to cost-effective replacement of legacy equipment in terms of installed cost and operational improvements. Igniters that consistently light off main burners, provide reliable transition support, and have proven, tested to compliance, service life, are absolutely must-haves for fossil power (boilers and HRSGs) generation competing against renewables. Igniters that ignite and support fired heater burners thus eliminating a significant source of nuisance trips drop savings directly to the bottom line.