current-monitoring-with-adjustment-test-station Downloads
10 downloads found
This sacrificial anode cathodic protection system test-station was primarily designed for the water storage tank industry but can be used in conjunction with pipeline or other sacrificial anode system. The test-station allows for the easy adjustment of DC current being generated within a sacrificial anode cathodic protection system. The test-station is equipped with a digital meter, that when ...
XTDB019 is a residual direct current monitoring module (RDC-M-module) which, electrically coupled to a protection unit or switching unit, performs the function of the residual direct current monitoring device (RDC-MD), in full compliance with the requirements of IEC 62955. As an option, the module can also integrate residual alternate current monitoring, in compliance with the threshold and ...
ByFRER Srl
The RCM 202-AB enables continuous monitoring of TN-S systems and complies with DIN EN 62020/VDE 0663/IEC 62020. This refers to residual current monitoring devices which check circuits for the occurrence of a residual current and trigger an alarm if a set alarm value is exceeded. The two-channel residual current monitoring device is suitable for the monitoring of residual currents type A to Type ...
The INT185 current transformer is used for current measurement of machines and equipment (e.g. motors of pumps). It is connected to the KRIWAN protective relays that have a current transformer input. The evaluation takes place in the KRIWAN protection relays. The small dimensions facilitate installation in the control cabinet. The current transformer is available in different versions, e.g. with ...
ByKRIWAN
Alpha-Beta-Gamma sensitive detectors are coupled to Model TBM-3-D electronics. An electronic sorter accepts and displays Alpha counts only or Alphas plus Beta-Gamma, or Beta-Gamma only. Windows are protected by a frame and grid which is easily removed for decontamination. The very large face detectors achieve the fastest most sensitive floor monitoring system currently ...
The RCM 201-ROGO enables continuous monitoring of TN-S systems and comply with DIN EN 62020/VDE 0663/IEC 62020. This refers to residual current monitoring devices which check circuits for the occurrence of a residual current and trigger an alarm if a set alarm value is exceeded. It is ideally suited for monitoring residual currents in TN-S systems. The main application of the stand-alone device ...
Information on the sigma S6 WaMoS®II Wave and Surface Current Monitoring system. ...
Weidmann’s InsuLogix® B bushing monitor is a cost-effective continuous on-line transformer bushing monitor system for measuring relative power factor at operating voltage in high voltage capacitive bushings and/or HV current transformers. The transformer monitor device acquires, analyses, and trends data pertaining to AC insulation power ...
The heart ol the intelligent combiner box is the CAN-Bus enabled string current monitoring system, which monitors the string currents at 100 millisecond intervals. The design ol the ArrayGuard* adapts to the actual plant topology. It connects up to 32 PV strings and otters tuse protection tor the PV* and PV* pole, depending on the applicable earthing principle. DC main switch, over voltage ...
Thanks to our rich experience in development and application of protection relays, the research and development team of the company KONCAR – Electronics and informatics, Inc., has developed a series of devices, which answer all requests set for this sort of equipment. The protection relay type RFX is a sequel of KONPRO generation of protection relays, built for protection of distribution ...