fuels-testing Downloads
23 downloads found
CAS DataLoggers provided the data logging solution of fuel consumption monitoring for a company called FPC International, specializing in a diesel fuel additive widely used in tankers, trucks, and trains all over the world to save on fuel and engine maintenance costs while reducing carbon footprints and emissions. ...
The CAF G5 is a furnace designed to test ash fusibility, and optionally, the increasingly popular determination of biomass or solid recovered fuels testing. The coal ash fusibility test furnace conforms to the Standards ISO 540:2008; ASTM D 1857 / D1857M – 04 (2010); DIN 51730:2007-09; DD CEN/TS 15370-1:2006 (biomass) and ...
Héra series is PEMFC testing station designed to meet power range from 10 kW to 30 kW. It is suitable for testing of fuel cell stack at defined working condition. ...
ByRadBee
Single-cell testing is a great tool for the research and development of materials for fuel cells. Well-defined and repeatable conditions of Leancat PBT enable benchmarking of fuel cells also thanks to extensive scripting possibilities. ...
The ASTM D3241 / IP 323 Thermal Stability test is one of the most important tests for the jet fuel quality. This test method was inherently limited due to the subjectivity in the color standard for tube deposit ...
Ideally suited for research and development of large-area single cells or verification of stack design on short-stack level. Well-defined and repeatable conditions of Leancat PTS-10 enable benchmarking of fuel cells also thanks to extensive scripting possibilities. ...
The LSCF ink is made using our quality LSCF powder to provide an excellent cathode ink. It can be used to fabricate your own cells, and can be used to enhance contact of your solid oxide fuel cell to the test manifold. ...
Studsvik’s vast expertise in all facets of fuel qualification testing and analyses, as well as extensive experience in formal licensing process submitted to several regulatory agencies worldwide, is now available to organizations developing new fuel designs for the international marketplace. Studsvik’s expertise can provide significant cost savings and risk reduction and expedite the ...
The High Frequency Reciprocating Rig (HFRR) is a microprocessor-controlled reciprocating friction and wear test system which provides a fast, repeatable assessment of the performance of fuels and lubricants. It is particularly suitable for wear testing relatively poor lubricants such as diesel fuels and for boundary friction ...
The versions FCS-D-190 up to FCS-D-700 are especially designed for fuel consumption testing of engines with fuel supply pump located at the engine (underpressure fuel supply). ...
The versions FCS-D-190 up to FCS-D-700 are especially designed for fuel consumption testing of engines with fuel supply pump located at the engine (underpressure fuel supply). ...
During fuel cell system testing or development, an accurate, reliable and measurable supply of hydrogen is vital. With components resistant to hydrogen embrittlement, any delivery system must provide the fuel gas at the correct pressure and prevent emissions that could contaminate the stack catalyst. At AVL we have developed an answer to this challenge. We have named it AVL HyTron™. ...
We used the following test to determine the degree of efficacy of the ADsorb-it media as a sorbent for use in the removal of petroleum hydrocarbons from water after accidental spills or releases, and to determine its efficiency as compared to other well known ...
ByAdsorbit
AD Systems developed a new jet fuel thermal oxidation test rig (TO10) that ensures perfect fuel preparation, perfect fuel flow control, a perfect heater tube temperature profile and perfect thermal deposit quantification with the Deposit Rater – ...
Stackable cell voltage monitoring (CVM) system designed for H2 fuel-cell stack research, testing and applications. CVM system can be used to prevent damage to individual cells, to monitor lifetime conditions, and to ensure optimal working conditions in applications. CVM24P module is ideal for testing and research purposes. ...
The Intepro EL 9700 Electronic load Series is a new line of bench top and rack mount DC loads that combine six modes of operation with special test features including programmable CC soft start, dynamic pulsing, built in battery test, and short circuit mode making these DC loads ideal for testing power supplies and batteries as well as other ...
Stackable cell voltage monitoring (CVM) system designed for H2 fuel-cell stack research, testing and applications. CVM system can be used to prevent damage to individual cells, to monitor lifetime conditions, and to ensure optimal working conditions in applications. CVM64H module is ideal for testing and research purposes. CVM64H module is designed as a precise automotive-ready solution with ...
4-terminal cell connections, essential for testing very low impedance devices such as batteries and fuel cells.? ...