rankine-cycle Downloads
23 downloads found
Enosia's ENO-100LT Organic Rankine Cycle module is a complete, packaged unit, that includes all the components needed for a reliable and efficient heat to power ...
The ORC technology is particularly suitable for the exploitation of medium-to-low enthalpy sources. It is a cost-effective solution with power outputs reaching up to 40 MWe per single generator for sources with water temperature from 100°C to 200°C or higher. ...
ORC stands for “Organic Rankine Cycle” – a procedure that uses waste heat to produce electricity with the aid of an evaporation ...
The Clean Cycle has been designed with flexibility in mind so that a wide variety of heat sources can be tapped to generate electricity. Regardless of the heat source, if it can create hot water or steam at sufficient temperatures - typically through a heat exchanger - the Clean Cycle can generate electricity from it. The water or steam directed to the Clean ...
ST&P, Turboden Steam & Power ORC system, is a new technical solution for Combined Heat & Power (CHP) generation, with a very high overall energy efficiency, directly employed in manufacturing and industrial processes. It allows the production of electricity and a valuable high temperature heat carrier, such as steam, directly exploitable in manufacturing processes. ...
In combined cycles, Turboden ORC units can be installed downstream of gas turbines and reciprocating engines, producing electricity by recovering waste heat. In both cases the combined cycle achieves an efficiency greater than 50%. The power of Turboden turbogenerators in this application generally ranges up to 20 MW electric per single shaft. ...
Turboden Organic Rankine Cycle (ORC) units enable power production (up to 20 MW per single turbine) by recovering excess waste heat from the exhausts of gas turbines or reciprocating engines, or from the hot streams typical in Oil & Gas industry. ORC turbogenerators provide a solution to improving the efficiency of typical Oil & Gas processes, by allowing users to reduce their ...
Turboden ORC units can produce electricity by recovering heat from industrial processes and in combined cycles with reciprocating engines and gas turbines. The power of Turboden turbo generators in this application generally ranges up to 20 MW electric per single shaft. ...
Waste heat from industrial processes, together with residual heat from heat and power production and waste incineration, represent significant energy resources that today are frequently neglected. In addition to energy losses and decreased system performance, cooling residual heat also consumes additional primary electric energy. Opcon Powerbox ORC is a stand-alone power plant that transforms ...
Zuccato Energia systems are impeccably eco-friendly. They recover otherwise wasted resources, such as residual heat and processing waste to produce clean electric energy and a significant energy saving. The entire process has zero emissions in the atmosphere, it uses an HFC working fluid and a thermal transfer fluid both completely “ozone-friendly”, non-toxic, fully ...
Zuccato Energia designs and manufactures ORC (Organic Rankine Cycle) systems to transform the heat generated by industrial processes, motors and renewable sources into clean electricity with high efficiency. It expands its product range with turboexpanders for methane ...
This enables combining belt drying with cogeneration plants: gasification, Organic Rankine Cycle (ORC), etc.Minimum fire riskAutomatic operationOptimum product quality: as it is an indirect drying, the drying air is clean and no particle enters from the open air. ...
Learn more about ElectraTherm's Organic Rankine Cycle (ORC) technology and their industry-leading waste heat recovery solutions. The Active Cooler, ElectraTherm's net-zero cooling to power system, reduces the cooling load and generates clean energy in a self-powered cycle in order to provide highly efficient cooling in addition to power generation. It is the radiator alternative that pays for ...
Learn more about ElectraTherm's Organic Rankine Cycle (ORC) technology and their industry-leading waste heat recovery solutions. The Active Cooler, ElectraTherm's net-zero cooling to power system, reduces the cooling load and generates clean energy in a self-powered cycle in order to provide highly efficient cooling in addition to power generation. It is the radiator alternative that pays for ...
Learn more about ElectraTherm's Organic Rankine Cycle (ORC) technology and their industry-leading low temperature waste heat recovery solutions. The Power+ Generator, ElectraTherm's heat to power system, generates emission-free electricity as well as usable thermal - while reducing energy costs and offsetting the parasitic cooling load. Operators utilize heat at low as 70C and generate up to ...
Learn more about ElectraTherm's Organic Rankine Cycle (ORC) technology and their industry-leading low temperature waste heat recovery solutions. The Power+ Generator, ElectraTherm's heat to power system, generates emission-free electricity as well as usable thermal - while reducing energy costs and offsetting the parasitic cooling load. Operators utilize heat at low as 160F and generate up to ...
Their suitability for use as conden-sation or back-pressure turbines in combination with various inte-gral gears modules opens up a broad application range.Technical datan Power output up to 6 MWn Inlet pressure up to 131 bar(a)/1,900 psin Inlet temperature dry saturated steam up to 530 °C/985 °Fn Speed acc. to driven machine n Exhaust pressure: back pressure up to 29 bar(a)/420 psi or ...
These units are designed with multi-stage burners and can be provided in the following sizes:Biomass and Wood Fired BoilersField Erected Boilers up to 300,000 PPH Output – Saturated or superheated steam – Tangent tube, tube and tile, and membrane wall designs – Wet and dry fuel systems – Auxiliary gas or oil burners – Low NOX EmissionsPackage Boilers up to 70,000 PPH Steam Output – Compact, ...
.; Production, characterisation, and combustion properties of solid biofuels from innovative feedstocks; Solid biofuel logistics and storage.3.2 Advanced solid biofuelsThermal upgrading of solid biofuels: torrefaction, (hydrothermal) car-bonisation, charcoal production, etc.3.3 Oil-based biofuelsInnovative processes for the production of oil-based fuels (biodiesel, jet fuel, etc.) from oilseeds, ...