Only show results in Connecticut? Ok

Hydropower Engineering equipment for Hydro Energy

  • Premium

    Hilliard BrakeBoss - Model BBH3 - Advanced Brake Control System

    The H3 Power Unit is Hilliard's most advanced brake control system. With a PID Loop Control, the BBH3 Power Unit is capable of monitoring speed. The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise ...

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from Braking Systems - BrakeBoss Product line

  • Premium

    Landustrie Landy - Hydropower Screw Turbines

    The new range of the Landustrie screw pump covers the hydropower screw turbines. An efficient use of water power is already achieved at a level difference of 1 meter and a capacity of 500 l/sec. The largest capacity and level difference for hydropower screws is as much as 15000 l/sec. at 10 meter.

    By Landustrie Sneek BV based in Sneek, NETHERLANDS. from Hydropower Product line

  • Premium

    Hilliard BrakeBoss - Model BBH2 - Brake Control System

    The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise control of brake pressure. Equipped with manual overrides and hand pump for power outages, high pressure filtration and control braking mode to meet ...

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from Braking Systems - BrakeBoss Product line

  • 36 Foot Roll-Off Trailer

    Structure: A-36, 10 by 4 by 3/8 Main Beams, with a 1 by 4 Top Flat Bar. Dimension:s 6’ H, 36’ 4.75” L, 8’ W. Hydraulic Power Unit (Option): 46 HP, 3 Cylinder Diesel Engine with Spark Arrester. Lift Cylinders: 2 - 3 Stage, 6” Double Acting Hydraulic Cylinders. Winch: 45,000 lbs Direct Planetary Gears Line Pull ...

    By Domatex Inc. based in Houston, TEXAS (USA). from Trailers Product line

  • Hydropower Gantry Crane

    Hydropower Gantry Crane mounted on the hydropower station crest, used in various large scale water supply and drainage, water conservancy and hydropower engineering and other places. Mainly used for lifting the hydropower station gate to reach the purpose of its open and close, maintenance and repair equipment, cleaning up rivers, etc.Hydropower ...

    By Weihua Crane Machinery Co., Ltd. based in xinxiang, CHINA.

  • Honda - Model 200 & 200E - Hydro Power Plants

    Hydro power plant Honda 200: Engine: GX200. Dimensions: 65x40x40. Displacement: 200 cm³. power: 6,5hj. Weight: 40kg. Pump 3500rpm: 9 L/min   175bar.

    By Kreisi Metall OÜ based in Lääne-Virumaa, ESTONIA.

  • Reivax - Model RTVX - Integrated Systems

    The Integrated Voltage and Speed Regulation RTVX Power Systems were developed to integrate the voltage regulation system and speed governor system, optimizing the signals and resources. The RTVX Power performs all supervision, control, and automation functions related to the generating unit, and can be fully customized meet the most demanding ...

    By Reivax North America, Inc. based in Montréal, CANADA. from Integrated System Product line

  • Hydropower

    As the industry leader in the water resources and hydropower engineering sector, SINOHYDRO specializes in the design and implementation of complex industrial projects in the energy sectors, including dams, power stations, and transport and storage solutions to handover of turnkey projects. SINOHYDRO controls 70% domestic market share.The large and ...

    By SINOHYDRO CORPORATION based in Beijing, CHINA.

  • ASM - Hydraulic Powers Units

    In order to provide a complete machinery system and maintain the quality and dependability of that system, ASM builds our hydraulic power units on site. We build power units that are specifically designed for use in the sawmill environment. All our power units feature heat exchangers, which are several sizes larger than the 'theoretical' design ...

    By Advanced Sawmill Machinery Inc. (ASM) based in Holt, FLORIDA (USA).

  • Hydraulic Solution

    At Fluitecnik Windenergy we design and manufacture hydraulic power units, cylinders, and accumulators. We can build according to the specifications of our clients, or design a unique system using our own engineering expertise. Our developments take into account the specific needs of product longevity and the difficulty of maintenance in remote ...

    By Fluitecnik, S.A. based in Orkoien, SPAIN. from Windenergy Product line

  • Kropf - Model SP-80 - Marine Hydraulic Self-Propelled Trailer

    Capacity (size): Powerboats to 80' LOA; Sailboats to 82' LOA, Capacity (weight): 160,000 lbs, 16' x 16' x .500' HSS steel tube frame - bridged construction, Integral hydraulic front-end power unit, Power: 120 HP CAT Diesel, 60 degree steering, Full hydrostatic drive with dynamic braking (multi wet-disk parking brake), Variable speed to 5 MPH, ...

    By Kropf Industrial Inc. based in Seguin, ONTARIO (CANADA). from Self-Propelled Trailers Product line

  • Kropf - Model SP-100 - Marine Hydraulic Self-Propelled Trailer

    Capacity (size): Powerboats to 90' LOA; Sailboats to 92' LOA, Capacity (weight): 200,000 lbs, 16' x 16' x .500' HSS steel tube frame - bridged construction, Integral hydraulic front-end power unit, Power: 120 HP CAT Diesel, 60 degree steering, Full hydrostatic drive with dynamic braking (multi wet-disk parking brake), Variable speed to 5 MPH, ...

    By Kropf Industrial Inc. based in Seguin, ONTARIO (CANADA). from Self-Propelled Trailers Product line

  • Lovol - Model FL968H - Wheel Loader

    Cummins QSL9.3 engine special for loaders, superior performance, reliable. World famous German ZF4BP230 original heavy-duty automatic shifting gearbox, reliable and comfortable, low maintenance costs. ROPS/FOPS certified cab for operator safety and reliable operation in tough conditions. Compound working conditions, powerful, efficient.  ...

    By Lovol Heavy Industry CO.,LTD based in Qingdao, CHINA. from Construction Product line

  • Adams - Portable Conveyors

    18' & 24' Portable Conveyors from 24' to 66'. Made from 304 Stainless Steel , TOP drives for up to 40' and CENTER drive for 42'-66' Material- 120# pvc belting, 3-roller troughing idlers on 4' spacing, M/S square tubing frame under carriage (Powder Coated) with Stainless Steel cable lift & winch, 11L - 15 tires & wheels, 10-15 hp TEFC ...

    By Adams Fertilizer Equipment based in DeWitt, ARKANSAS (USA). from Handling - Conveyor Product line

  • Chandler - Litter Conveyor

    The Chandler Litter Conveyor makes loading spreaders and semi-trailers easy work; loading a 45’ trailer in as little time as 15 to 20 minutes. This Conveyor comes standard with a self-contained hydraulic system, powered by a 18 H.P. Honda engine. Operators can easily raise and lower the discharge height with our uniquely designed scissor ...

    By Chandler Equipment Co based in Gainsville, GEORGIA (US) (USA). from Poultry Litter Conveyor Product line

  • Model 200 Gallon - Trailer Sprayer

    200 gallon Snyder tank Tongue jack Adjustable boom bracket Manifold bracket Hose hanger 15 X 8 rims Complete plumbing kit including manifold, pressure gauge, relief valve, strainer, and tank cut off Heavy duty 4 X 2 tubular construction Rigid, high wrap around saddle

    By Remcor, Inc. based in Howe, TEXAS (USA). from Trailer Sprayers Product line

  • CMI - Model C400L - High Drive Track System

    Equipped with a hydraulically powered mulcher head offering a cutting capacity of 91 inches, the C 400 L is ideal in drilling or commercial preparation sites, road building , power line clearing , leasing to name a few.

    By C.M.I. Mulching inc. based in Saint-Cyrille-De-Wendover, QUEBEC (CANADA).

  • GE - Pump Hydro Turbine

    Quick response to fluctuations in power demand. With our extensive hydraulic design portfolio, GE is able to provide a solution adapted to our customers’ specific needs in a variety of environments. GE's complete line of pump turbine offerings are suited for heads from 5m to 1,200m and have production potential ranging from 50 MW to 500 MW. ...

    By GE Renewable Energy based in Paris, FRANCE. from Large Hydropower Turbines Product line

  • Ronamic - Low Head Hydropower High Power Turbine

    This turbine is a typical application of the RONAMIC technology in rivers and water reservoirs with (existing) dams where there is an abundance of water. This RONAMIC turbine is designed with a special flow system for high flow and high power output. Despite a slightly lower turbine efficiency, the generated power is substantially higher than that ...

    By Ronamic based in CW Noordwijk, NETHERLANDS.

  • GE - Medium and Large Hydro Generators

    High reliability and the highest outputs available worldwide. GE's medium and large hydro generators are designed for run-of-river and high head hydropower plants. Our knowledge and experience in Hydropower allows our GE team to match customers with the best technology for their site.

    By GE Renewable Energy based in Paris, FRANCE. from Large Hydro Generators Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you