- Home
- Equipment
- usa wisconsin
- news
- feedpelletmills.com
Refine by
Applications
- Braking systems solutions for the renewable energy sector
- Motion control solutions for the mining industry
- Motion control solutions for the power generation sector
- Process heating for commercial and industrial functions
- Drive train solutions for the All terrain vehicles/utility vehicles sector
- Li-ion battery electrode manufacturing
- Compressed Natural Gas (CNG) Fuel for Natural Gas Vehicles
- Drive train solutions for the outdoor power equipment sector
- Horizontal Shaft Mixer for Biomass Power
- Environmental solutions for the waste incineration industry
- Drive train solutions for the concrete/construction industry
News Equipment Supplied In Usa Wisconsin
724 equipment items found
Showcase
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Fuel Gas Strainers are custom-engineered duplex or simplex basket strainers built from wrought materials—not castings—for superior flexibility and serviceability. Designed to ASME Code standards, they accommodate mesh-lined or perforated baskets and offer options like internal bypass, differential pressure gauges, and varied material constructions to fit oil & gas, power generation, ...
Premium
Manufactured by:Kovalus Separation Solutions, Inc. based inWilmington, MASSACHUSETTS (USA)
Eco-Tec’s TriFlo Demineralizer produces the ultrapure water (i.e. conductivity of less than 0.1 μS/cm) often required to feed critical and super critical boilers. This is achieved economically with stable and robust process equipment from feed water containing up to 450 ppm of total dissolved solids. Ultrapure water can be achieved by simply adding an additional cation resin bed as a ...
Premium
Manufactured by:Watertronics, Inc. based inHartland, WISCONSIN (USA)
Transient over-voltages induced by lightning, industrial and switching surges, or electrostatic discharge, can harm electronic equipment. It can interrupt service, which may be unacceptable, or it could interfere with operations and expose data transmissions to disturbances and malfunctioning. Over-voltages also cause premature aging of components. The Watertronics premium three stage surge ...
Premium
Manufactured by:Kovalus Separation Solutions, Inc. based inWilmington, MASSACHUSETTS (USA)
BgPur is Eco-Tec’s proven H2S removal system for treatment of biogas from anaerobic digesters or landfills. The system is capable of treating biogas with H2S concentrations of a few hundred ppmv to over 30,000 ppmv (3%) while reducing the H2S to a just a few ppm to meet downstream requirements for power generation or heating fuel, or to be sold for pipeline or transportation ...
Premium
Manufactured by:Anguil Environmental Systems, Inc. based inMilwaukee, WISCONSIN (USA)
Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...
Premium
Manufactured by:Kovalus Separation Solutions, Inc. based inWilmington, MASSACHUSETTS (USA)
The BgPur system is our proven solution for biogas treatment from anaerobic digesters and landfill. The system reduces hydrogen sulfide (H2S) concentrations and converts it to solid elemental sulfur for resale. The system uses a liquid chemical catalyst, compact gas/liquid contactor, and solids removal system and does not consume the chemical catalyst driving the conversion of H2S to sulfur, ...
Premium
Manufactured by:Kovalus Separation Solutions, Inc. based inWilmington, MASSACHUSETTS (USA)
The SgPur system is specifically designed to treat sour gas from oil and gas operations. The system reduces hydrogen sulfide (H2S) concentrations and converts it to solid elemental sulfur for resale. The system uses a liquid chemical catalyst, compact gas/liquid contactor, and solids removal system and does not consume the chemical catalyst driving the conversion of H2S to sulfur, minimizing ...
Premium
Manufactured by:Kovalus Separation Solutions, Inc. based inWilmington, MASSACHUSETTS (USA)
Etching or chemical milling with caustic soda can often be the greatest operating expense in aluminum anodizing. Our CER Caustic Etch Recovery System continuously crystallizes and removes dissolved aluminum from caustic soda etchants and returns the caustic to the etching/milling tanks for reuse resulting in reduced chemical costs, waste treatment costs, and labor requirements. The separated ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The patented Hilliard Extreme Duty Centrifugal Clutch has been engineered in pulley and sprocket versions to provide long service life and is ideal for retrofit or new equipment applications. A thermodynamically designed clutch shoe increases the clutch's capacity to absorb heat without damaging the integrity of the ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard Electric Brakes provide positive stopping and reliable holding of rotating devices on demand-every time. Spring engaged when current is interrupted and electromagnetically relased when voltage is applied, these brakes are designed for maximum flexibility and long, dependable service. Each brake has an easy-to-adjust wear bolt to compensate for friction service wear and extend the life of ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M300 brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M300 brake caliper is capable of producing a maximum 10,600 LBF (47 kN) of braking force at 1600 PSI (110 Bar) and has been designed for ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Process Cartridges (330 Series) provide a reliable alternative to string-wound filter elements. Designed to boost ISO cleanliness, they come in standard or extended-tube versions, with durable disposable or washable media options and nylon or metal end caps. Suitable for industrial use across marine, mining, gas, power generation, oil & gas, pulp & paper, refinery, and steel ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M400SH brake caliper is a spring applied, hydraulically released brake for use in heavy duty industrial applications. The brake comes standard with marine grade epoxy paint suitable for outdoor environments. The M400SH is available with standard force ratings which when paired with the correct disc size produces an exact braking torque for the application. The caliper features ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard standard disc hubs are supplied with parallel or tapered bores and keywayed to accommodate customer requirements. Hubs are manufactured from either iron or steel. Special hubs with keyless locking devices are also ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M700SH brake caliper is a spring applied, hydraulically released brake for use in heavy duty industrial applications. The brake comes standard with marine grade epoxy paint suitable for extreme environments. It is available with standard force ratings which, when paired with the correct disc size, produces an exact braking torque for the application. The caliper features "maintenance ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M900SH brake caliper is a floating spring applied, hydraulically released brake for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M900SH is capable of producing 170,000 LBF (750 kN) of braking force. The floating design can accommodate up to 1 inch of axial ...
Premium
Manufactured by:Watertronics, Inc. based inHartland, WISCONSIN (USA)
Higher motor electrical efficiency rates of 4% to 6%, will equate to hundreds of dollars saved per year. Built to withstand inverter power better than conventional motors. Balanced to tighter tolerances for higher efficiency and durability. Extended warranty by the motor manufacturer of up to 3 ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard MK4800 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as heavy duty lift operations, conveyors, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting angle. The MK4800 is capable of producing a maximum 4,800 LBF of braking ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" thick ...
Premium
Manufactured by:Environmental Dynamics International (EDI) based inColumbia, MISSOURI (USA)
Available for FlexAir Pro tube, disc, and panel diffusers, as well as FlexAir Basic disc diffusers. Temperature resistance up to 240 °F (115 °C). Chemical resistance for municipal and most industrial applications. Armor-Coated™ technology available for specialized applications. UV protection incorporated in the compound. Low dynamic wet pressure. Low oil construction for membrane ...