Current Monitoring System Articles & Analysis
9 news found
Hioki is pleased to announce the launch of the AC Leakage Clamp Meter CM4002 and CM4003, which streamline current leakage investigations and deliver high-precision, high-reliability leakage current measurement capability. The new instruments, which update the Clamp-on Leak HiTester 3283, can measure parameters ranging from AC leakage current to load current. In addition to a newly designed ...
After extensive testing, the sigma S6 WaMoS®II Wave and Surface Current Monitoring System was re-certified by DNV-GL in May of this year. ...
The data is published by the European Environment Agency (EEA), which started monitoring the emissions of light commercial vehicles last year. Emissions levels are very different across Europe – they were lowest among new vans sold in Malta, Portugal and France, while new vehicles in Slovakia, Germany and the Czech Republic had emissions approximately a third higher. ...
In April 2013 a new measuring vehicle for water loss analysis was handed over to the Bottrop-based executive board of Rheinisch-Westfälische Wasserwerks-GmbH (RWW GmbH), in Gütersloh. A VW Crafter with high roof and long wheelbase was used. Behind the driver and passenger area is an office area, with an adjoining equipment compartment in the back. The walls and roof of the ...
The average van sold emitted 180.3 grams of carbon dioxide per kilometer (gCO2/km), according to the data, which covers most light commercial vehicles sold in the EU. Current emissions are slightly higher than the 175 gCO2/km target to be met by 2017. By 2020, emissions should be 147 gCO2/km, which is 18.5% lower than current levels. The targets come from EU ...
, A19 LED light bulb technology (Electrical Devices category); and AVA-Clamp?, clamp-on voltage and current metering technology (Electronic Instrumentation category). ...
The compact physical size of the solar cells costs 93 percent less to produce than current photovoltaic cells, contributing to a 46 percent reduction in building CPV solar panels. ...
Fault detection features of SMA’s transformerless Sunny Boy 8000TL-US, Sunny Boy 9000TL-US, and Sunny Boy 10000TL-US inverters include the Riso Detector and Residual Current Monitoring Unit (RCMU). The Riso Detector checks insulation resistance prior to or during inverter startup and prevents operation if a fault is detected. During operation, the RCMU ...
An integrated data logger stores the measurement values of as many as 20 inverters for ten years. This means that the system values from the past can be compared with current data at anytime. ...