- Home
- Companies
- Tube Clamps India Pvt. Ltd.
- Products
- 37 Degree Flare Fittings
37 Degree Flare Fittings
Manufacturer & supplier of JIC 37 Degree Flare Tube Fittings in India. A fitting flare is a sleeve that aligns the tube to the fitting body axis along with minimizing the mechanical strain on the tube. 37 Degree Flare Fittings are available in a wide range of configurations and can be repeatedly disassembled and reassembled without the need to replace any component. 37-degree flare fittings manufacturers in India recommend these as the assembly displays a good performance under severe vibrations and thermal shocks. Parker 37 Degree Flare Fittings can be coupled with fractional tubes and they do not undergo distortion.
Jic 37 Degree Flare has negligible fluid pressure loss and the components used can be replaced individually. Sae 37 Degree Flare metal-to-metal seal works with a wide range of operating temperatures. Also, Jic Fittings male flare end fits metric as well as inches tube. JIC Tube Fittings does not have minimum wall thickness requirements. A tube Fittings that is without a sleeve and nut can be used as a hose adapter. Triple-lok Fittings are available in steel, stainless steel, and brass. 37 Degree Hydraulic Fittings are forged that eliminate the leak path and provides a longer service life.
A 37 Degree Flare Fittings are much stronger than the machined part as they are cold-formed. 37 Degree Fitting is used in motion and flow control products such as fluid delivery and fluid power applications. 37 Degree Flare Tube Fittings can leak if they are over tightened or if there are bad flares, burrs on pipe, or due to wrong size flares. Parker Flare Fittings are similar to Army Navy fittings but are less expensive as they are produced to less exacting tolerance. Sae J514 Tube Fittings end should be kept free of oil, thread, Teflon tape, pipe sealant, or grease as they do not help in obtaining a tight leak free seal.
