- Home
- Companies
- Aereon, part of Cimarron group
- Products
- Aereon - Knock-Out Drums and Liquid ...
Aereon - Knock-Out Drums and Liquid Seals
We design Knockout Drums (KO Drums) in both horizontal and vertical configurations, as gas-liquid separators with high efficiency of separation of liquid droplets, with maximum size in the range 300-600 microns. We also supply Liquid Seal Drums, including all accessories: anti-pulsation device, siphon, level control, liquid make-up, and instrumentation. These systems are designed for the protection of the upstream flare header against flashbacks/explosions, in the event of purge loss, withstanding a certain degree of vacuum upstream of the drum without seal break. Typical of hot flaring or low molecular weight scenarios; dis-entrainment of liquid droplets; stage the operation of multiple flares, by adopting liquid depth to the desired staging pressure.
- Utility Flares / Assisted Flares / Pressure Assisted Flares
- Derricks and Demountable Flares Systems
- Multi-Point Ground Flare Systems
- Enclosed Flares Systems and Biogas Flares
- Burn Pit Flares / Liquid Burners
- Pilot Burners and Ignition Systems
- Knock-out Drums and Liquid Seals
- Tips equipped with proprietary stabilization tabs and rings for flame retaining and stabilization
- Purge reduction systems, dynamic or buoyancy seal
- Material selection as per specifications, in terms of material grade, properties and testing such as special alloys (UNS08811, UNS N0660), NACE, HIC and others
- Pilot burners are ISO 25457:2008 (API 537), self-inspirated and characterized by very low fuel consumptions and high reliability. Equipped with thermocouples or flame ionization rods with single or redundant ignition system. Built in stainless steel 310/316 with casted items
- Flame remote monitoring, smokeless control, retractability packages for thermocouples, pilot burners, aircraft warning lights (AWL), and many other turnkey solutions
- Highly reliable and tested pilot burners
- Miscellaneous instrumentation for IR monitor, Sentinel UV monitor, Smokeless monitor, and control
- Instrumentation for flow monitoring (ultrasonic), remote flame monitoring of both pilot flame and flare tip flame, smokeless control via flame intensity optical monitors, and many others
- Solar panel systems
- FFG ignition systems with long venturi for induced air suction
- Aircraft warning lights, Ex-d, conforming to ICAO code latest edition
- Retractability packages for thermocouples, aircraft warning lights, and pilot burners
- Circumferential assist gas ring
- Circular ignition source
- Assist air to maintain waste gas within the combustion zone
- High alloy construction in the heat affected zone
- Flame retention ring to stabilize combustion
- High alloy air shroud
- Dimensions:
- Length: 10’ - 0” (3m)
- Diameter: 4” - 84” (0.1-2.13m)
- Materials:
- Upper Section: 304, 316, 310 SS, Incolloy 800H (options)
- Lower Section: Carbon Steel
- Flame ring manifold: 304, 316, 310 SS, Incolloy 800H (options)
- Retention Ring: 304, 316, 310 SS
- Dynamic Seal: 304 SS