Refine by
Acm Energy Equipment & Supplies In In Qatar
29 equipment items found
Manufactured by:ACME Engineering Industries based inAhmedabad,, INDIA
Pressure: 1.6 Mpa. Speed: up to 20 m/s. Temperature: -30? to 200?. Rotary Ring (S136/SiC/TC). Stationary Ring (Resin Carbon/SiC/TC). Secondary seal (NBR/EPDM/Viton). Spring & Other ...
Manufactured by:ACME Engineering Industries based inAhmedabad,, INDIA
Pressure: 1.6 Mpa Speed: 20 m/s. Temperature: -30? to 200?. Rotary Ring (S136/SiC/TC). Stationary Ring (Resin Carbon/SiC/TC). Secondary seal (NBR/EPDM/Viton). Spring & Other ...
Manufactured by:ACME Engineering Industries based inAhmedabad,, INDIA
Pressure: 1.6 Mpa Speed: 20 m/s. Temperature: -30? to 200?. Rotary Ring (S136/SiC/TC). Stationary Ring (Resin Carbon/SiC/TC). Secondary seal (NBR/EPDM/Viton). Spring & Other ...
Manufactured by:ACME Engineering Industries based inAhmedabad,, INDIA
Pressure: 1.6 Mpa. Speed: up to 20 m/s. Temperature: -30? to 200?. Rotary Ring (S136/SiC/TC). Stationary Ring (Resin Carbon/SiC/TC). Secondary seal (NBR/EPDM/Viton). Spring & Other ...
Manufactured by:Advanced Ceramic Materials (ACM) based inLake Forest, CALIFORNIA (USA)
Pyrolytic boron nitride is a kind of boron nitride prepared by high temperature pyrolysis reaction by chemical vapor deposition. PBN is an advanced material with excellent properties. It is deposited by the reaction of ammonia and boron halide under high temperature and high vacuum conditions. It can be deposited as PBN sheet material or directly into PBN final products such as tubes, rings or ...
Manufactured by:Advanced Ceramic Materials (ACM) based inLake Forest, CALIFORNIA (USA)
Hot pressed h-BN, with hardness about 4, is a machinable material. As the forming of this material is not quite easy, it requires about 1900F if it is hot pressed without boron oxide. BN material could withstand higher temperature in vacuum. SAM is contiuoursly cooperate with boron nitride manufacturers and research instituations to enhance the product performance. Our hBN custom parts would ...
by:Advanced Corporation for Materials & Equipments Co., Ltd. based inChangsha City, CHINA
t is used for vacuum oil quenching of materials like alloy steel, high speed steel, super high strength steel, M300 steel and etc. It is specially suitable for vacuum heat treatment of long rod type parts, plate type parts, long axle parts, landing gears and similar large size parts. The jobs treated by the furnace have little deformation and good ...
Manufactured by:Advanced Ceramic Materials (ACM) based inLake Forest, CALIFORNIA (USA)
Aluminum nitride, AlN, is a white ceramic material which has a density of 3.26g/cm3. AlN was first synthesized in 1877, but it was not until the middle of the 1980s that its potential for application in microelectronics was realized. Due to its high thermal conductivity and great electrical insulation, aluminum nitride was used in microelectronic industries. Metallization methods are available to ...
Manufactured by:Advanced Ceramic Materials (ACM) based inLake Forest, CALIFORNIA (USA)
Silicon carbide (SiC), also known as carborundum or SiC, is a semiconductor containing silicon and carbon. Since the late 19th century silicon carbide has been an important material for sandpapers, grinding wheels, and cutting tools. More recently, it has found application in refractory linings and heating elements for industrial furnaces, in wear-resistant parts for pumps and rocket engines, and ...
Manufactured by:Advanced Ceramic Materials (ACM) based inLake Forest, CALIFORNIA (USA)
Boron Carbide, or B4C, is an extremely hard ceramic material discovered in 1899. The Mohs hardness of boron carbide is about 9.49, ranking the third hardest materials behind diamond and cubic boron nitride. It was applied widely in industries as wearing resistant material, ...
Manufactured by:Acme Engineering Prod. Ltd. based inMont-Royal, QUEBEC (CANADA)
A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient. They are completely packaged boilers ideally suited for applications requiring from 30 to more than 10,000 pounds of steam per hour. ACME Steam Generators are based on more than half a century of accumulated experience in the electric heating field. Easy and ...
Manufactured by:Acme Engineering Prod. Ltd. based inMont-Royal, QUEBEC (CANADA)
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. ...
Manufactured by:Acme Engineering Prod. Ltd. based inMont-Royal, QUEBEC (CANADA)
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
Manufactured by:Acme Engineering Prod. Ltd. based inMont-Royal, QUEBEC (CANADA)
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
Manufactured by:Acme Engineering Prod. Ltd. based inMont-Royal, QUEBEC (CANADA)
The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...
Manufactured by:ACME Engineering Industries based inAhmedabad,, INDIA
Pressure: up to 2.5Mpa. Speed: up to 20 m/s. Temperature: -20? to 180?. Rotary Ring (SiC/TC). Stationary Ring (Carbon/SiC/TC). Secondary seal (Viton/Encapsulated Ring). Spring & Other ...
Manufactured by:ACME Engineering Industries based inAhmedabad,, INDIA
Pressure: 1.6 Mpa. Speed: 20 m/s. Temperature: -30? to 200?. Rotary Ring (S136/SiC/TC). Stationary Ring (Resin Carbon/SiC/TC). Secondary seal (NBR/EPDM/Viton). Spring & Other Parts(SS304/SS316). ...
Manufactured by:Acme Air Equipments Company Pvt. Ltd. based inAhmedabad, INDIA
Acme Air Equipments Company Pvt. Ltd. is an ISO 9001-2015 quality certified company. It is a most trusted and quality manufacturer of Gas Boosters (Booster Compressor), Twin/Tri Lobe Roots Blower and allied systems, established in 1990.The natural gas is now widely used in many industries like power plants, furnaces, burners, glass manufacturing etc. to name a few. Depending on the variation in ...
Manufactured by:Advanced Ceramic Materials (ACM) based inLake Forest, CALIFORNIA (USA)
Silicon Nitride is a high-melting-point ceramic material that is extremely hard and relatively chemically inert. The material is prepared by heating powdered silicon between 1300 °C and 1400 °C in an atmosphere of nitrogen. Then the powder of silicon nitride can be sintered to designed ...
Manufactured by:Advanced Ceramic Materials (ACM) based inLake Forest, CALIFORNIA (USA)
Alumina, or aluminum oxide, with a molecular weight of 102, is the major source of aluminum in nature. Alumina has very high melting point, which is 2,072 °C and it is extremely hard. Alumina ceramic is the most common technical ceramic material and a relatively traditional material. High purity alumina ceramics as a fine ceramic material is widely used in a lot of ...