- Home
- Equipment
Refine by
Hydro Energy Equipment & Supplies
56 equipment items found
Manufactured by:HeliosAltas Corporation based inRoseville, CALIFORNIA (USA)
Create Your Own Power Array: Helios Hydro-Farm is a series of Helios PowerWheel units installed in parallel or series configuration in the same canal or stream which produce an aggregated amount of power equal to the sum of the output from all individual units. The net power output from a Helios Hydro-Farm is conditioned and delivered to an independent micro grid or a utility ...
Manufactured by:Hydro-Temp Corporation based inPocahontas, ARKANSAS (USA)
3Star Series (Model: RAV/RAH/RAC/RAS/RAR); Sizes: 2.5, 4.0,6.0 Tons EER's up to ...
Manufactured by:Hydro-Temp Corporation based inPocahontas, ARKANSAS (USA)
HUD Single Speed (Model: HUD); Sizes: 1.0 1.5, 2.0, 2.5, 3.0 Tons EER's up to ...
Manufactured by:Hydro-Temp Corporation based inPocahontas, ARKANSAS (USA)
VStar Water-2-Water; Sizes: 2.5, 4.0, 6.0 ...
Manufactured by:Rhomar Water based inSpringfield, MISSOURI (USA)
Hydro-Steam 9150 is an alkaline, multi-purpose product formulated to gently and effectively remove and disperse scale, corrosion products, and organic matter in residential and small commercial steam ...
Manufactured by:Hydro Quip, Inc. (HQI) based inSeekonk, MASSACHUSETTS (USA)
Hydro Quip, Inc offers a wide variety of custom design tanks to meet industry standards. Whether you need a stand-alone unit or one to be used in conjunction with other equipment, we can supply it. Tanks can be constructed out of stainless steel, carbon steel, aluminum, plastic, FRP or special alloys. A variety of options are ...
Manufactured by:Forward Hydro based in
Pelton Turbine is an impulse turbine used primarily for applications with high head and small flows. Forward's Pelton turbines are based on decades of know-how and state-of-the-art technology. These Pelton turbines guarantee the highest operating efficiency and ...
Manufactured by:Forward Hydro based in
Turgo turbines are a development of the Pelton turbine. They can handle a higher flow rate than a physically similar-sized Pelton turbine and the rotor is slightly cheaper to manufacture. The high specific speed allows using the Turgo principle instead of multi-jet Pelton turbines or instead of Francis turbines at lower partial load ...
Manufactured by:Forward Hydro based in
Suitable for a very large range of heads and flows. With achievable turbine efficiencies of the turbine over 94%. Forward Hydro designs and manufactures Francis turbines with rated output up to 30MW. We offer proven technology for the best energy yield ...
Manufactured by:FDE Hydro based inChelmsford, MASSACHUSETTS (USA)
FDE Hydro has developed a technology, called The French Dam, which is considered by civil engineers and hydro industry experts as a disruptive technology since it changes the project financial dynamics, reducing major risk to all Stakeholders and gives the development team a much faster ...
Manufactured by:Hydro-Pac Inc. based inFairview, PENNSYLVANIA (USA)
The LX-SERIES™ Gas Compressor is the most popular compressor for hydrogen gas applications. This model has been installed world wide in fixed and mobile fueling stations, industrial and manufacturing sites, research and development facilities and off-shore applications. Standard models are rated for discharge pressures of 1,500 to 12,000 psig with frame sizes from 3 to 60HP. These ...
Manufactured by:Hydro-Pac Inc. based inFairview, PENNSYLVANIA (USA)
The Li’l CRITTER™ High-Pressure Gas Compressor is used for low capacity production and research applications that require a small flowrate at high pressure. Standard units are available for discharge pressures of 10,000 to 60,000 psig (70 to 415 MPa) in frame sizes of 3, 5 and 7.5 hp (2.3, 3.8 and 5.6 kW). Two-stage Li’l Critter™ compressors typically operate with inlet ...
Manufactured by:Hydro-Pac Inc. based inFairview, PENNSYLVANIA (USA)
The FLEXI-POWER™ High-Pressure Gas Compressor is used for high pressure testing, alternative refueling, high flowrate research applications and heavy duty industrial applications. Standard units are available for discharge pressures of 10,000 to 60,000 psig (70 to 415 MPa) in frame sizes from 10 to 100 hp (7.5 to 75 kW). Two-stage FX compressors typically operate with inlet pressure ranges ...
Manufactured by:Hydro Royal based inSnohomish, WASHINGTON (USA)
Heat Exchanger: Turbo Titanium. Compressor Type: Scroll. BTU Output: 40,000. COP: 5.9 (Coefficient of Performance). Max Circuit Performance: 30 AMP. Water Flow - Min/Max: 20-90 GPM. Plumbing Size: 2'. Thermostat Capacity: 10-40 C. Dual Thermostat: Yes. Weight (Shipping): 180 Lbs (210 Lbs). Size - W x H x D: 82 x 82 x 87 cm. Foot Print (D x W): 82 x 82 ...
Manufactured by:Hydro Royal based inSnohomish, WASHINGTON (USA)
Heat Exchanger: Turbo Titanium. Compressor Type: Scroll. BTU Output: 49,000. COP: 5.3 (Coefficient of Performance). Max Circuit Performance: 50 AMP. Water Flow - Min/Max: 20-90 GPM. Plumbing Size: 2'. Thermostat Capacity: 10-40 C. Dual Thermostat: Yes. Weight (Shipping): 185 Lbs (215 Lbs). Size - W x H x D: 82 x 82 x 87 cm. Foot Print (D x W): 82 x 82 cm. Horsepower: ...
Manufactured by:Taco Comfort Solutions - part of the Taco family of companies based inCranston, RHODE ISLAND (USA)
Taco’s Hydro-Sep™ Hydraulic Separators are compact economical units that allow fast and efficient installation of primary/secondary piping for many different boilers. Installing this unique Hydraulic Separator offers the additional advantages of assisting in the removal of unwanted air and dirt particles, preventing their damaging affects on system components. It is especially ...
Manufactured by:Hydro Tek Systems, Inc based inRedlands, CALIFORNIA (USA)
The RPV Hydro Vacuum® is a water evacuation system which capture and transfer waste water. It transfers the water while vacuuming, eliminating the inefficient task of having to continually dump your collection tank. The RPV is ideal for flood and fire restoration contractors because of the large volume of water that can be removed. It is also useful for anyone wanting to eliminate water ...
Manufactured by:CINK Hydro - Energy k.s. based inSadov, CZECH REPUBLIC
Low-voltage, middle-voltage, and complete control system ...
Manufactured by:CINK Hydro - Energy k.s. based inSadov, CZECH REPUBLIC
Designed according to a turbine technology from 1903 and developed for the needs of modern power plants. Tailor-made for every installation, applicable to run-of-the-river projects, dams, drinking water systems, wastewater treatment plants or to remote, isolated-operation projects. Minimal civil works, easy to install, long service life and almost maintenance-free. No complex spare parts ...
Manufactured by:CINK Hydro - Energy k.s. based inSadov, CZECH REPUBLIC
Low-head, double-regulated Kaplan turbines. With compact structure and minimum requirements on excavation and civil works. Easily maintained, with long service life and high efficiency across the entire operation range (20% - 100% of design flow). Penstock-ready and available in four different layouts to suit the needs on every low-head dam or run-of-the-river ...