Abet Energy Industry Equipment
-
Manufactured by Abet Technologies, Inc.based in USA
The Abet Gen II optical design, patent pending, dramatically increases the percentage of photons reaching the work plane. All electronics are packaged in the lamp house -no clutter of high power cables to deal with. A digital shutter timer allowing both manual and external control is included with every unit. Standard maintenance, lamp or filter replacement, does not require any tools. Locking ...
-
Manufactured by Abet Technologies, Inc.based in USA
Abet Multi-Zone Vacuum chucks are available in four standard sizes, 50 x 50 mm, 156 x 156 mm, 210 x 210 mm and 300 x 300 mm. Cells from 3 x 3 mm to the chuck maximum size can be accomodated A set of cell locators is included with each chuck to allow for reproducible positioning of the devices. A locating bracket correctly positions the chuck with respect to an Abet Solar Simulator. For use with ...
-
Manufactured by Abet Technologies, Inc.based in USA
The AB6000 series QE Measurement Systems provide turnkey solutions for spectral characterization. A LED based light engine allows DC to high frequency monochromatic light generation. No chopper or order sorting filters required. The 250 mm focal length, direct drive monochromator offers high scan speed and generous light output. Micrometer driven slits allow reproducible bandwidth ...
-
Manufactured by Abet Technologies, Inc.based in USA
Multi-Junction solar cell metrology is more complicated than that of a single junction one. As these cells are made of multiple layers, a multi-source/LED solar simulator is usually employed to allow adjustment of band to band irradiance ratios. Our triple junction reference cells can be used to set the correct irradiance for each single ...
-
Manufactured by Abet Technologies, Inc.based in USA
Cost Effective Solution: Abet Technologies model 10500 is a low cost solar simulator providing an attractive alternative to more fully featured and expensive solar simulators for applications that do not require a large area illuminated field. The optical system of the 10500 produces a collimated 25 mm beam. Focus or defocus it for higher irradiance or larger solar cells. One sun output is ...
-
Manufactured by Abet Technologies, Inc.based in USA
Most DC arc lamp based solar simulators utilize a set of components similar to the one above which represents Abet Technologies preferred way of producing Class AAA Solar Simulator performance. A Xe short arc lamp is energized by a power supply, not shown. The lamp is located inside an elliptical reflector which collects a high percentage of its light output. Lamp’s output is refocused near ...
-
Manufactured by Abet Technologies, Inc.based in USA
Innovative and Complete: The Abet Gen II optical design, patent pending, dramatically increases the percentage of photons reaching the work ...
-
Manufactured by Abet Technologies, Inc.based in USA
The Abet Technologies solar reference cell is a precision instrument for the determination of solar simulator irradiance levels. The sensor is a mono-crystalline silicon solar cell having an area of2x2cm(4cm).The back of the solar cell is attached to the device in such a way that a good heat transfer to the device housing is guaranteed. Below the solar cell a Pt100 RTD temperature sensor is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you