Refine by
C Nox Energy Equipment & Supplies In In Laos
7 equipment items found
Manufactured by:C-nox GmbH & Co. KG based inNeumünster, GERMANY
Thanks to the modular system, the most economical solution is available for every application. Design examples for all biogases, sewage gases or synthetic gases for combustion temperatures of up to ...
Manufactured by:C-nox GmbH & Co. KG based inNeumünster, GERMANY
The light option for retrofitting. Options: With or without compressor. Winter package with electrical heaters. Commissioning. Maintenance and ...
Manufactured by:C-nox GmbH & Co. KG based inNeumünster, GERMANY
The controlled gas/air ratio in the combustion chamber ensures that a temperature of >1000 °C is always maintained in the combustion chamber. The flow rate in and the geometry of the combustion chamber ensure a minimum gas dwell time. During this time, any residual oxidizable compounds are oxidized as required in the German technical circular on protection against air ...
Manufactured by:C-nox GmbH & Co. KG based inNeumünster, GERMANY
If the combustion air is heated upstream of the combustion process, the consumption of the support gas required for the combustion of lean gases can be significantly reduced. The necessary heat is taken from the exhaust gas and guided into the combustion chamber via heat exchangers. If the dimensioning is right, for example methane concentrations of down to 12% can be burned without the need for ...
Manufactured by:C-nox GmbH & Co. KG based inNeumünster, GERMANY
Conventional heat exchangers can only be used within limitations on account of their material properties at high temperatures. For this reason, only a small part of the heat from the flame can be used for the pre-heating of the raw gas. The patented recuperative combustion chamber from C-nox (patent no.: 10 2012 023 257) improves the heat recovery from exhaust gases and allows the autothermal ...
Manufactured by:C-nox GmbH & Co. KG based inNeumünster, GERMANY
High-Temperature Flares for environmentally compatible combustion, lean gases require added support gas, such as natural gas or propane. Here again, the controlled gas/air ratio ensures the required combustion temperature of >1000 °C inside the combustion chamber. As a variation from the standard technology, in this flare type the required quantity of support gas is added to the ...
Manufactured by:C-nox GmbH & Co. KG based inNeumünster, GERMANY
LCH flares (medium-temperature flares) are excellent for emergency disposal installations with constant methane concentrations (calorific values). The pre-set air supply ensures the correct combustion temperature and dwell time for the combustion gas. In this variant, once again only high quality components are used fulfilling all safety-engineering requirements (e.g. ATEX, DIN EN 746-2, DIN EN ...