- Home
- Equipment
Refine by
Fanox Energy Equipment & Supplies
9 equipment items found
Manufactured by:Fanox Electronic, S.L. based inDerio – Bizkaia, SPAIN
Fanox PBM is a Monitoring, Control and Protection System, which brings an integral solution to Motor Control Centers. Fanox has redesigned PBM providing it with new functionality and improving his operability, which makes him an indispensable resource for ...
Manufactured by:Fanox Electronic, S.L. based inDerio – Bizkaia, SPAIN
The SIL-G is a perfect protection relay for primary distribution which can protect a feeder by means of current, voltage and frequency functions. It also has the advantage to provide with the main functions to protect a generator protecting decoupling, load shedding and loss of main (islanding). It is normally used with a circuit breaker as cutting ...
Manufactured by:Fanox Electronic, S.L. based inDerio – Bizkaia, SPAIN
SIA-F protection relay is suitable to protect installations against O/C and E/F. Its compact size makes this relay adequate for installition where the space is critical. Optionally, other protection functions as the thermal image (ANSI 49) the trip block for switch disconnector and control functions as the monitorization of the CB (ANSI 52), The breaker failure (ANSI 50BF) can be ...
Manufactured by:Fanox Electronic, S.L. based inDerio – Bizkaia, SPAIN
Dual & Self powered overcurrent protection relay using the operating current through three specific current transformers fitted on the lines. These transformers are also used to obtain current measurements. Optionally, SIAB relay can be used with auxiliary power supply (24 Vdc, 110 Vac or 230 Vac). The equipment can be occasionally supplied by an external battery portable kit ...
Manufactured by:Fanox Electronic, S.L. based inDerio – Bizkaia, SPAIN
Earth Leakage Protection & Measurement Transformers for Low Voltage.To be used with ELR-B, ELR-3C, D30 and DM30 relays. The transformer and relay assembly sensitivity is fixed by the relay. The toroidal transformer CTD-1/28 is specifically designed for DIN rail ...
Manufactured by:Fanox Electronic, S.L. based inDerio – Bizkaia, SPAIN
SIL-B Relays are for primary distribution which is ideal to protect a feeder by means of current and voltage functions and it is normally used with a circuit breaker as cutting ...
Manufactured by:Fanox Electronic, S.L. based inDerio – Bizkaia, SPAIN
SIL-D relay is designed to protect MV systems with isolated neutral. In switchgears with isolated neutral, the earth fault calculation cannot be done as an exact value due to it is not dependent from the short circuit power. It depends on the MV system capacitor it is connecting to. For this reason, the earth fault is related with the network voltage and with the features of the lines connected ...
Manufactured by:Fanox Electronic, S.L. based inDerio – Bizkaia, SPAIN
The SIL-A is an overcurrent and earth fault protection relay for primary and secondary distribution with auxiliary power supply 24-220 Vdc/ 48-230 Vac. The current measurement is obtained either by standard current transformers /1 or /5, or by special Low Power Current Transformers (LPCT). SIL-A has also many smart protection functions: 50_1, 50N/G_1(1), 50/51, 50/51N/G(1), 50BF, 46, 52, 79, ...
Manufactured by:Fanox Electronic, S.L. based inDerio – Bizkaia, SPAIN
One of the most critical situations in pump operation is dry running. In dry running situations a current decrease is detected. This reduction of consumed current is measured by the PS-R electronic relay fitted to the protection panel: When the preset undercurrent value is reached it switches the pump ...