- Home
- Equipment
Refine by
Gekakonus Energy Equipment & Supplies
8 equipment items found
Manufactured by:GekaKonus GmbH based inEggenstein-Leopoldshaf, GERMANY
The GekaKonus Thermal Oil Heater type THERMOMAT is a forced circulation heater of 3-pass design for organic high temperature heat transfer media on mineral or synthetic basis. It consists of a cylindrical combustion chamber, formed by closely bended pipes. This principle ensures that a defined heat transfer is achieved at any point of the heating surface. Forced circulation, and thus the flowing ...
Manufactured by:GekaKonus GmbH based inEggenstein-Leopoldshaf, GERMANY
The NUK-HP is a high-pressure natural circulation boiler operating by the gravity circulation principle. Therefore circulating pumps are not required to operate the NUK-HP®. Boiler water is used as the heat carrier. The water is evaporated in this boiler within a hermetically sealed circuit. The steam flows to the heat exchanger and the condensate flows by gravity back to the ...
Manufactured by:GekaKonus GmbH based inEggenstein-Leopoldshaf, GERMANY
The GekaKonus® steam generator is a secondary heated steam generator. Thermal oil is used as heating ...
Manufactured by:GekaKonus GmbH based inEggenstein-Leopoldshaf, GERMANY
The LUVO-System improves the thermal degree of efficiency of the process heating system. The energy of the exhaust gases heats up the combustion air temperature. The heat exchanger transfers the energy contained in the flue gas to the combustion air. Energy recovered in this way is proportional to the fuel saving. The amount of the recovered energy percentage depends on the fuel used by the ...
Manufactured by:GekaKonus GmbH based inEggenstein-Leopoldshaf, GERMANY
The basis for the GekaKonus® High Pressure Steam Boiler in open steam/condensate cycle type NWK-HP system is a modified GekaKonus® Natural Circulation Steam Boiler type NUK-HP® combined with a steam drum. The GekaKonus® NWK-HP system is being used in heating processes where the implementation of a closed steam/condensate cycle system is not ...
Manufactured by:GekaKonus GmbH based inEggenstein-Leopoldshaf, GERMANY
The GekaKonus® thermal oil heater type Elektrothermomat is a forced circulation heater for oil based or synthetic heat transfer fluids. GekaKonus® Elektrothermomat is used where there is a sufficient supply of electrical energy or in rooms where it is not possible to extract exhaust gas from gas or oil burners, in rooms where an open firing is prohibited or fuels as oil or gas are not ...
Manufactured by:GekaKonus GmbH based inEggenstein-Leopoldshaf, GERMANY
The GekaKonus® Exhaust Gas Thermal Oil Heater could be used for economical utilization of exhaust ...
Manufactured by:GekaKonus GmbH based inEggenstein-Leopoldshaf, GERMANY
The LSG-HP quick steam generator is a once-through forced flow steam generator. The system consists of a continuous bended single pass through spiral tube system. The feed water is feed into the tube system by means of an accurate positive displacement pump(s). The GekaKonus® quick steam generator system type GekaKonus® LSG-HP is designed for an open steam/condensate system. ...