- Home
- Equipment
Refine by
Pcs Energy Equipment & Supplies
8 equipment items found
Manufactured by:PCS Instruments based inLondon, UNITED KINGDOM
Peak Hertzian contact pressures typically range from 1.8 GPa in gears and cams to 3.5 GPa in rolling bearings and toroidal traction drives. The PCS-ETM enables tribological phenomena to be studied over the full range of ...
Manufactured by:Panel Components & Systems, Inc. (PC&S) based inStanhope, NEW JERSEY (USA)
The DKM-409 is a precision instrument designed for displaying various AC parameters in 3-phase distribution ...
Manufactured by:Panel Components & Systems, Inc. (PC&S) based inStanhope, NEW JERSEY (USA)
Complete 1-phase and 3-phase digital universal metering system. Measures a standard range of 17 different parameters. Four easy to access front control buttons to scroll up or down through the parameters. Blue LED display is designed to be sunlight readable over a very wide viewing angle. Plug-in communications modules for RS485, pulsed output and Ethernet. MODBUS RTU and BACnet MS/TP ...
Manufactured by:Panel Components & Systems, Inc. (PC&S) based inStanhope, NEW JERSEY (USA)
High quality, rugged construction is built into every switch that PC&S sells. Whether your requirement is for a control switch, an instrument switch, ON-OFF switch, Multi-step switch, a changeover switch, a voltage change switch, PC&S has the right switch for ...
Manufactured by:PCS Instruments based inLondon, UNITED KINGDOM
The EHD2 Ultra Thin Film Measurement System is the latest evolution of the successful EHD instrument. It is now a fully automated computer controlled instrument for measuring the film thickness and traction coefficient (friction coefficient) of lubricants in the elastohydrodynamic lubricating regime. The instrument can measure lubricant film thickness down to 1 nm with a precision of +/- 1 nm. ...
Manufactured by:Panel Components & Systems, Inc. (PC&S) based inStanhope, NEW JERSEY (USA)
The DKM-405 is a low-cost precision instrument designed to display various AC parameters in a 3-phase distribution ...
Manufactured by:Panel Components & Systems, Inc. (PC&S) based inStanhope, NEW JERSEY (USA)
This Hall Effect current sensor is based on open loop compensating principle and designed with a split core and a high galvanic isolation between primary and secondary circuits. It can be used for measurement of DC current etc. The output of the transducer reflects the real wave of the current carrying ...
Manufactured by:Panel Components & Systems, Inc. (PC&S) based inStanhope, NEW JERSEY (USA)
This Hall Effect current sensor is based on open loop compensating principle and designed with a split core and a high galvanic isolation between primary and secondary circuits. It can be used for measurement of DC current etc. The output of the transducer reflects the real wave of the current carrying ...