Refine by
Tornado Energy Equipment & Supplies In In Nepal
10 equipment items found
Manufactured by:RECK-Technik GmbH & Co. KG based inBetzenweiler, GERMANY
With special attachments for front loader, wheel loader, telescopic loader or excavator. The radial piston motor can be used with a volume flow up to 170 l /min and 250 bar. Lengths of the mixer rod are available from 4m to ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
The Tornado Pilot Monitoring and Auto-Relight (TPMR) System is the most reliable ignition system for flare stacks. The TPMR System consists of a continuous pilot and a self-contained relight system, with very low fuel consumption (25 SCFH). The assembly is fully retractable to grade for easy inspection and servicing without the need for ladders, platforms, pickers or ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
Tornado's utility flare design is an economical solution for emergency shut down (ESD) applications, compressor blowdowns, pigging, and cases where smoke emissions may not be a ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
Tornado's air-assisted flare stacks are designed to eliminate smoke emissions when combusting heavy hydrocarbons. Smoke emissions are the result of inefficient combustion of the waste gas producing unburnt hydrocarbon particles, often caused by an insufficient fuel/oxygen content ratio. Smoke emissions may violate local or national clean air regulations, or they may trigger landowner ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
Tornado's steam-assisted flare stacks are designed to combust heavy hydrocarbons with no smoke emissions when there is a source of high-pressure steam available on ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
At Tornado, our detonation arrestors are the best solution to prevent the propagation of flame fronts back through lines and piping configurations (also known as a ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
We offer custom-built burners for any application. Tornado has many years of experience in designing, manufacturing and retrofitting burners in a variety of applications. ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
The Tornado Electric Ignition System (TEIS) is a cost-effective alternative to the pilot monitoring system that can be used for sweet gas applications where fuel gas or propane supply is not ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
In applications where there are no immediate safety concerns regarding the combustion of waste gas, but there is still a desire to hide visible flame and reduce odour concerns, Tornado can offer an enclosed ground ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
Tornado's High Pressure or Low Pressure gas-assisted flare stack designs can eliminate smoke (HP Gas-Assist) or sour gas odours (LP Gas-Assist) on site. These designs can also be used to ensure efficient combustion in the most challenging of weather ...