- Home
- Companies
- Consolidated Laundry Machinery (CLM)
- Products
- CLM - Model 105 SP - Dryer
CLM - Model 105 SP -Dryer
The basket shall have a volume of 105 cu. ft. and shall be constructed of 10 gauge perforated metal with 3 main and 3 secondary lifting ribs, supported by four 10” polyurethane rollers equipped with timken roller bearings and guided at each end by a total of four 5” polyurethane rollers equipped with timken roller bearings. All rollers shall be located outside of the sealed heating chamber.
Basket Doors
The basket doors shall be a minimum of 42” in diameter and shall seal to and rotate with the basket to prevent the possibility of damage to products being dried. They shall be operated by an air over oil mechanism for smooth opening and closing. There shall be two basket doors to provide for loading at one end and unloading at the opposite end of the basket.
Basket Drive
The basket shall be driven by v-belts around the circumference of the basket. There shall be a self-adjusting, constantly variable tension device to keep the belts properly tensioned. The belts shall be located outside of the sealed heating chamber.
Optional Basket Cleaning
If specified, there shall be a device to automatically keep basket perforations open and clear of plastic residue to insure efficiency of air movement.
Machine Tilt
The main housing shall tilt a minimum of 18º to facilitate fast and easy loading and unloading of the machine. The tilt mechanism shall consist of two 5” i.d. double-cushioned air cylinders.
Heat and Cool Down System
Heat shall be supplied by two steam/air heat exchanger coils utilizing cupro-nickel tubing and silver solder with an automatic cold air bypass. All necessary traps and valves shall be included (optional).
Heat Control
Heating and cool-down shall be PLC controlled.
Exhaust System
The exhaust blower shall be single inlet, dynamically balanced and belt driven from a 10 hp motor to afford a minimum air flow of 6000 cfm. There shall be a device to automatically clean accumulated lint from the rotor at the beginning of each cycle.
Optional Outside Air Makeup
If specified, there shall be a means of providing makeup air directly to the burner and combustion chamber from outside the plant to prevent negative air pressure within the plant. The inlet duct shall have a minimum diameter of 26”.
Electric Motors
Exhaust blower 10 hp
Basket drive 3 hp
SERVICES Electricity
Varies with voltage characteristics
60 fla at 230v
Air
1/2” npt connection
80 psi minimum
Water
3/4” npt connection
80 psi minimum
Steam
1-1/2” npt inlet connection
1” npt return connection
100 psi minimum pressure
125 psi optimum pressure
20 bhp average hourly consumption
Exhaust Duct
Minimum 18” diameter or 260 sq. in. Maximum 1.0” wc backpressure
- 105 cubic feet steam-heated dryer
- Two-door pass-through
- One-way tilt
- PLC controls
Recommended Capacity
200-285 lbs. dry weight.