Beston - Model BLL-30 -Continuous Pyrolysis Plant

The materials are continuously transported to the pyrolysis furnace isolated from oxygen by the screw conveyor. This device has the following advantages. It has a high degree of automation and real-time monitoring design to help to reduce labor. More importantly, the device is equipped with a gram-level precision electronic weighing system. The amount of feed can be precisely controlled by workers.

This continuous type is equipped with a high-temperature resistant induced draft fan. It is made of stainless steel. This device can evenly mix two kinds of hot air in a certain proportion. They are exhaust gas in the furnace and the hot air provided by the burner. The mixed gas is used to heat the reactor. Because of the precise air volume ratio, this device helps to achieve precise temperature control in the reactor.

This pyrolysis system adopts a three-stage condensation structure. The primary condenser removes heavy impurities from high-temperature oil gas. The secondary and tertiary condensers improve the oil gas recovery rate and collect different quality of pyrolysis oil in stages. Also, this condenser uses a self-cleaning system. It uses the oil pump to circulate the hot oil in the oil tank to flush the pipes in the condenser.

In the feeding system, the air in the sealed silo is replaced by ammonia with a purity of more than 95%. This design effectively prevents excessive air or oxygen entering the continuous feed and the reactor. When ammonia replaces air, the oxygen-depleted environment inside the reactor makes the pyrolysis process safer and efficient. Contact us to get more information.

In order to ensure the safety of workers and save pyrolysis time, the discharge system is equipped with automatic water cooling dischargers. The spiral water cooling system reduces the temperature of the carbon black to below 30 degrees. In addition, the screw seal discharger can prevent air from entering the flue. The whole discharging process is safe.

In recent years, Asian and European governments have imposed stricter requirements on local factories than in past decades. Beston continuous pyrolysis unit solves this problem well. Before being discharged, the exhaust gas is processed by the dedusting system. If this system still does not meet your requirements, we provide you with an activated carbon adsorption system.