DuPont Solamet - Model PV21A - Photovoltaic Metallization Paste for Front Side/Single-Print Cells
From Solamet
Our front side paste is a highly conductive silver composition and delivers superior efficiency for P-type Solar Cells. It enables finer line design, excellent printability, and is able to be co-fired with back side (p-type) aluminum conductors and tabbing silver such as Solamet® PV5xx. It is designed for rapid dry and fast (spike) firing for P-type solar cells, LDE and PERC which provides further aspect ratio improvement and superior contact.
-
Most popular related searches
Benefits
- Enhanced organic design improves fine line printing with better aspect ratio
- Enables extreme Lightly Doped Emitters (LDE) by reducing contact resistance and optimizes overall cell performance as a result of fill factor (FF) and open circuit voltage (Voc) improvement
- Improved efficiency up to 0.1% over DuPont™ Solamet® PV20x series
- Superior metallization contact on LDE/ ultra LDE (standard or
- PERC cell)
- Excellent ink transfer capability at versatile fine line design
- High electrical conductivity after firing
- Reduced carrier recombination at Ag/Si interface
- Optimized for low stress and good soldered adhesion with excellent
- solderability
- Fast drying and firing
- Cadmium free*
*Cadmium ‘free’ as used herein means that cadmium is not an intentional ingredient in and is not intentionally added to the referenced product. Trace amounts however may be present.
Customer reviews
No reviews were found for DuPont Solamet - Model PV21A - Photovoltaic Metallization Paste for Front Side/Single-Print Cells. Be the first to review!