- Home
- Companies
- Eneko Heat Recovery Ventilation
- Products
- EPOVENT - Aluminium Plate Heat Recovery ...
EPOVENT - Aluminium Plate Heat Recovery Unit
In places where fresh air demand is high as a result of intense occupancy like cinemas, shopping malls, airports, office buildings, high-rise buildings, sport arenas, conference rooms, and museums to extract stale indoor air outdoors and introduce fresh air indoors are required. EPOVENT units are developed to benefit from the energy of exhaust air, to minimize the load of air conditioning of outdoors and to obtain energy saving. For food warehouses and similar applications where humidity transfer between air streams is not desirable EPOVENT units can be used. With the help of aluminum plate exchanger the unit is capable of transferring both heat and moisture between exhaust and supply air streams thus improving energy savings in the HVAC. EPOVENT units are designed to be used as heat recovery ventilators as well as heating/cooling.
- EPOVENT (series heat recovery ventilator) units deliver a compact design for ventilation and air conditioning applications with direct drive plug fans with EC technology, exhaust and supply air filters and electronic control (equipment).
- EPOVENT (series heat recovery ventilator) units, thanks to cross-flow heat exchanger, reduce the load of fresh air of indoor space and the capacity of air-conditioning unit. For cooling function (free cooling) in summer, by-pass module is designed.
- With optionally added heating/cooling coils, after pre-conditioning in heat recovery unit fresh air can be heated or cooled to ambient temperature.
- Electrical and electronic components desired for operation are installed within the unit; no additional equipment is needed on site but mains connection. Microprocessor based control system operates the unit according to design conditions by checking temperature, air flow or Indoor Air Quality. Control system is developed for several demand options of the investor.
- BMS connection is possible via Modbus as standard.
- Standard and optional operational conditions, season select, set temperature, and unit on/off can be done via room control panel.
- High aerodynamic, energy efficient direct drive plug fans with EC technology are used
- With energy saving EC plug fan technology, and with the help of aluminum plate heat exchanger, it is capable of transferring heat between exhaust and supply air streams, thus reducing initial and operational costs of the system.
- Reduces initial investment cost of air-conditioning equipment (boiler, chiller, etc.) due to high heat recovery efficiency.
- Reduces CO₂ emission as a result of energy saving, and prevents environmental pollution.
- Automatic free-cooling.
- Filters fresh air on steps demanded.
- 50 mm thickness of Rockwool is used for thermal and sound insulation, and the unit is also double-skin, and secured in rigid frames. It can be installed indoors or outdoors.
- Each service door has locking mechanism to ensure safe service. To prevent leakage gaskets are used.
- Optionally, for extreme climates fresh air electrical heaters are advised to be used against freezing.
- Electronic control is installed within the unit; no additional equipment is needed on site, only mains connection enhancing “Plug and Play” design.
- EPOVENT units are designed for fresh air flow rates between 5000 and 45000m³/h.