- Home
- Companies
- Suneco Micro Hydro Power
- Products
- Suneco - Model 6000KW - Francis Turbine
Suneco - Model 6000KW -Francis Turbine
Francis turbine is a reaction turbine，is the most common water turbine in use today. Applicable water head 30m~700m. Specific speed:50~300rpm. The largest capacity of our single Francis turbine unit is 6000KW. Head range up to more than 300 m. Capacity up to about 20 000 kW. Excellent peak efficiency. High efficiency also at partial water flow down to about 50%. Complete range of specific speeds for runner design allows optimized matching to synchronous speed. Compact design and low maintenance requirements by rigorous selection of best suited materials and proper design. 2 or 4 bearing gen-set arrangements. Bearings rated for more than 100 000 hours of operation Guide vane control electrically or hydraulically.
The Francis Turbine Large Hydro Power spread all over the country in each province and autonomous region, export to more than ten countries such as U.S.A., Iran, Vietnam, Indonesia, Pakistan, Sri Lanka, Mongolia, Korea,etc..
Specifications︰
- The diameter of the runner is 0.42m- 5.0m;
- Suitable water head: H =8m- 140m;
- Suitable flow: Q =0.20m3/s- 50.0m3/s;
- Capacity of the generator unit: 500kw -100000kw.
Advantages︰
- Francis Type Turbine-Generator is suitable for hydropower station of middle or high water head and medium-sized flow
- Because the structure of the Turbine-Generator is simple , and it is reliable to run.
- Suitable for various water head and include many types of runners, they can be widely used.
- It is suitable for hydropower stations whose water head change large