Hamworthy Heating Limited
- Home
- Companies
- Hamworthy Heating Limited
- Products
- Hamworthy - Model ModuMax mk3 - Floor ...
Hamworthy - Model ModuMax mk3 -Floor Standing Boiler
Stainless steel high efficiency, fully modulating condensing pre-mix floor standing boiler. Available in 5 modules with outputs (@80/60°C) of 97, 116, 147, 196 and 254kW. Individual boiler modules can be stacked one, two or three high in 15 combinations up to 762kW output.
Most popular related searches
floor standing boiler
combined heat and power
district heating scheme
air source heat pump
stainless steel heat exchanger
boiler controller
boiler control
district heating
district heating network
heat and power
- Fully modulating boiler which benefits from lower fuel usage and closer load matching.
- Space-saving stacked modular boiler delivering 762kW in less than a square metre footprint.
- Flexibility in system design with differential temperature (delta T) up to 40°C. Suited to district heating schemes, the lower flow rates associated with wider differential temperature allow smaller diameter pipes and smaller pumps that can lower capital cost and also reduce energy consumption.
- Compensate for distribution losses in large heating systems with max 90°C flow temperature.
- 10 bar maximum working pressure allows installation in basement for high rise buildings.
- Stainless steel heat exchanger backed up by with a 10-year warranty, making the Wessex ModuMax mk3 an extremely robust boiler.
- High relative velocity within the waterways help to reduce the opportunity for sedimentation.
- Hybrid systems alongside combined heat and power (CHP) and/or other low carbon technologies such as our commercial monobloc air source heat pumps.
- Energy centres within district heating schemes and larger premises.
- Housing developments and flats using district heating network.
- Easy fit replacement for refurbishment projects.
- Roof top and basement plantrooms.
- Packaged plantrooms.
- New build projects.
- Large commercial and public buildings including schools, hospitals and hotels.
- Medium sized commercial and public buildings including schools, hospitals, offices and hotels.
- Small industrial and manufacturing premises.
- Locations with substantial and continuous heating load including hospitals, care homes and hotels.
- Pipework kits to match the boiler model for ease of installation on site.
- Flues available
- Choose from a wide range of service contracts to help maintain optimum performance.
- Book commissioning at the same time as placing your order for improved warranty terms.
Single Boiler Controls
- Outside air temperature sensor QAC34 (Part no. 533901457).
- Domestic Hot Water sensor kit (sensor and pocket) (Part no. 563605674).
- Mixing valve heating circuit control kit (clip in control module, temperature sensor and pocket) for 1 zone (Part no. 563605668).
- Mixing valve heating circuit control kit (clip in control module, temperature sensor and pocket) for 2 zones (Part no. 563605669).
- Mixing valve heating circuit control kit (clip in control module, temperature sensor and pocket) for 3 zones – Note: cannot be used in conjunction with volt free contact kit (Part no. 563605670).
- Programmable room sensor QAA75 (Part no. 533901587).
- Offset adjustable room sensor QAA55 (Part no. 533901589).
Multiple Boiler Controls
- Outside air temperature sensor QAC34 (Part no. 533901457).
- Volt free contact kit for remote status signalling AGU2.550A109 (Part no. 563605666).
- Heating circuit sensor kit (sensor and pocket) QAZ36 (Part no. 563605673).
- Merley boiler sequence controller, wall mounted (Part no. 563605672).
- Merley boiler sequence controller, loose kit for panel mounting (Part no. 563605671).
- LPB Bus communication module OCI345, one required per boiler module (Part no. 563605667).
- Programmable room sensor QAA75 (Part no. 533901587).