Model CARSIC310 - High-performance Ceramic Silicon Carbide

The technical properties of the high-performance ceramic silicon carbide CARSIC310 are convincing in every respect. The material has a chemical resistance in a pH range of 0-14.

This means that components made of this material are not only corrosion-resistant to hydrochloric acid or nitric acid, for example, but also to hydrofluoric acid. The material is therefore universally corrosion-resistant and is also characterized by high wear resistance, which is retained even at high application temperatures of up to 1500 ° C.

Its hardness is 2400 HV 0.5. In addition, CARSIC310 has very good emergency and dry running properties, i.e. excellent tribological behavior. Due to its very high thermal conductivity of 100 W / m K, CARSIC310 can quickly dissipate process heat, for example in the pump.

In addition to the excellent chemical and physical properties, our material CARSIC310 also impresses with its high surface quality. Its open porosity is 0%, which is why it is also suitable for applications that require a gas-tight material.

For components made of this material, due to its special technical properties - depending on the construction - dimensions up to Ø 200 mm are possible - with the highest compressive strength (2400 MPa). Circumferential speeds of up to v = 50m / s are no problem for products made from CARSIC310.

Here at a glance the most important properties of CARSIC310, a directly sintered silicon carbide:

• open porosity = 0%
• gas-tight material
• Temperature resistance up to 1,500 ° C
• high hardness
• low specific density: 3.1 g / cm³
• very high corrosion and
• Wear resistance
• Thermal conductivity = 100 W / m K
• chemical resistance from pH 0 to pH 14
• tested according to FDA guidelines
• Circumferential speeds up to v = 50 m / s
• Use in the hygiene and food sector
• high surface quality
• CIP / SIP cleaning possible

The specified property values only apply to the test specimens on which they were measured. For standard parts and depending on the version, the values may differ. The stated values are to be understood as guide values. They refer to a temperature of 20 ° C, unless otherwise stated. Please contact us if you require further information. Status 3/2016

Due to its special technical properties, our high-performance ceramic silicon carbide CARSIC310 is a suitable material for a wide variety of fields of application in various industries. Plant manufacturers in the pharmaceutical and foodstuffs industry use CARSIC310 products particularly frequently due to the physiological harmlessness of the material. In addition, our material CARSIC310 has been tested in accordance with the legal requirements for food contact and FDA guidelines.

Thanks to a construction with very few gaps, we are able to offer companies in this branch the fulfillment of the highest hygiene standards, even with composite products made of ceramics and metal. Companies in the mechanical and plant engineering sector also benefit from these advantages .

There and also in the pump industryProducts made from CARSIC310 convince due to the excellent chemical and physical properties of the material. This and the gas-tightness of CARSIC310 make the material and the products made from it an ideal solution for the energy and environment sector. Overall, all sectors benefit from the CARSIC310 offering an economical solution thanks to its long service life and operational reliability.

OXIDKERAMIK can use the material CARSIC310 to manufacture any product that is required by our customers. Plain bearings and slip rings that we manufacture from CARSIC310, for example, are extremely corrosion and wear resistant.

In addition, they are ideal for use with aggressive media such as those in chemical productionhappen. They also have high rigidity, low effects from centrifugal forces and very good emergency running properties. They also have very good tribological sliding properties. We manufacture pistons or shaft protection sleeves from CARSIC310

for pump and system construction . We also manufacture other pump components individually for our customers. In addition to metal-ceramic composite solutions, CARSIC310 is also particularly suitable for use as a counter- rotating partner

After all, our company also produces nozzles for water jet cutting technology, guide and deflection elements, burner nozzles, components for the semiconductor industry and homogenization valves, among other things . All products make a decisive contribution to a long service life, regardless of where they are used.