Kaukora Europe
- Home
- Companies
- Kaukora Europe
- Products
- Jäspi - Model FIL-SPL 31.5 -400 - ...
Jäspi - Model FIL-SPL 31.5 -400 -Electric Boilers
FromKaukora Europe
The Jaspi FILSPL electric boiler can operate as an independent heat source or it can be connected to heat pump systems as a source of backup and additional heat. Jaspi FIL SPL is suitable for terraced houses, apartment buildings and industrial properties. FIL SPL consists of electric heaters and a control unit and does not include a hot water tank. FIL works with flow-through technology and requires an external circulating water pump that circulates water in the boiler. Jäspi FIL electric boilers (31.5 – 1600 kW) are already equipped and tested at the factory.
Most popular related searches
electric boiler
heat pump system
heat pump
electric heater
electrical resistor
power plant control
power plant controller
electric power
electrical power
boiler controller
- Acid-resistant, flange-sealed resistors (surface power<7,5 W/ cm²)
- Flow-through technology
- Reliable, customer- and power plant-friendly control automation
- The automatic temperature control handles the heating correctly, economically adjusting the lowest required power to the boiler. The control systems are delivered in 7- or 15-stage, which means that the stage powers are sufficiently small.
- Electric power in FIL boilers up to 1600 kW
- FIL LP models are intended for heat pump systems as a backup and additional heat source
- Hot water coil as standard on FIL B models
- Independent heat source or additional heat source for heat pump systems.
- Can be connected to many heating systems.
- For detached houses as well as terraced houses, blocks of flats and industrial properties.
- Electrical resistors and control unit.
- Can be controlled remotely
- Does not include hot water tank.
- Works with flow-through technology and requires an external circulating water pump that circulates water in the boiler.
- 7 or 15 stage control system.