Refine by
Gpe Combustion Control Equipment & Supplies
11 equipment items found
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Integral Motor / Pump, Low Inertia / Torque Ratio, Same options as 13x10 Models, Simplicity of Design, High Speed ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Proportional Adjustable Ration Control, Pressure, DP, or Electronic Input, Uses Common Power Supply, Spindle, Slide, Bell Crank, or Geared Wheel Ration Adjusters, 235 to 45,000 lbs. of ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Meets JIC Standards, 5 to 15 Horsepower, 500 to 900 PSI, 60 Gallon Reservoir, 10 to 20 ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Double end, low by-pass leakage, 1 1/2" - 8" bore, bronze bearings, up to 1500 lbs, chrome plated cylinder rod, foot, flange, or pivot ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Model 13210 Proportlonal-Plus-Reset Hydraulic Controller Is designed for slow-reacting control applications that require stability. A group of controllers are supplied from a separate, but common power supply. The controller has a practical output range of approximately 235 to 45,000 pounds of force at the actuator. Model 13210 accepts pressure or differential ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Five Gallon Reservoir, 125 to 230 PSI, Mounting for Two Controllers, External Pump for Easy Maintenance, 1/2 Horsepower Pump, Meets JIC Standards, 0.8 to 4.0 ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Integral Power Supply, Pressures up to 930 psi, 5.8 to 14.1 GPM, 3 to 7.5 Horsepower, 35 Gallon Reservoir, Proportional Control, Pneumatic or Electronic Inputs, Manual or Automatic ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Integral Power Supply, Pressures up to 1000 psi, 10 to 40 GPM, 10 to 25 Horsepower, 100 Gallon Reservoir, Proportional Control, Pneumatic or Electronic Inputs, Manual or Automatic ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Single End, Low By-Pass Leakage, 1 1/2' - 8' Bore, Bronze Bearings, Up to 1500 lbs, Chrome Plated Cylinder Rod, Foot, Flange, or Pivot ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Proportional Control, Pressure, DP, or Electronic Input, Uses Common Power Supply, Spindle Set Point Adjusters, 235 to 45,000 lbs. ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Ten Gallon Reservoir Eliminates the Need for Heat Exchanger, Pressure, Filter, and Level / Temperature Switches, Meets JIC Standards, 3.7 GPM, 100 to 300 ...