Show results for
Refine by
Control Within Combustion Equipment & Supplies
263 equipment items found
Showcase
Manufactured by:FARM2000 - M & K Products (Bromsgrove) Ltd. based inDodford, UNITED KINGDOM
FARM2000 High Temperature (HT) boilers are used for heating, hot water and hot air systems by efficient and controlled combustion of biomass. Biomass contain gases which represent half of the calorific value, and which can only be burned and release their energy at high ...
Premium
Manufactured by:PROMECON Process Measurement Control GmbH based inBarleben, GERMANY
The McON UBC system continuously measures the content of unburnt carbon in fly ash as the main combustion quality control parameter. The patented system works in-situ, without complicated sampling and for most robust and lowest maintenance requirements. The system is available in different configurations to suit your application. Your complete fly ash assessment ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Integral Motor / Pump, Low Inertia / Torque Ratio, Same options as 13x10 Models, Simplicity of Design, High Speed ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Integral Power Supply, Pressures up to 930 psi, 5.8 to 14.1 GPM, 3 to 7.5 Horsepower, 35 Gallon Reservoir, Proportional Control, Pneumatic or Electronic Inputs, Manual or Automatic ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Integral Power Supply, Pressures up to 1000 psi, 10 to 40 GPM, 10 to 25 Horsepower, 100 Gallon Reservoir, Proportional Control, Pneumatic or Electronic Inputs, Manual or Automatic ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Single End, Low By-Pass Leakage, 1 1/2' - 8' Bore, Bronze Bearings, Up to 1500 lbs, Chrome Plated Cylinder Rod, Foot, Flange, or Pivot ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Proportional Adjustable Ration Control, Pressure, DP, or Electronic Input, Uses Common Power Supply, Spindle, Slide, Bell Crank, or Geared Wheel Ration Adjusters, 235 to 45,000 lbs. of ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Proportional Control, Pressure, DP, or Electronic Input, Uses Common Power Supply, Spindle Set Point Adjusters, 235 to 45,000 lbs. ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Meets JIC Standards, 5 to 15 Horsepower, 500 to 900 PSI, 60 Gallon Reservoir, 10 to 20 ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Double end, low by-pass leakage, 1 1/2" - 8" bore, bronze bearings, up to 1500 lbs, chrome plated cylinder rod, foot, flange, or pivot ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Model 13210 Proportlonal-Plus-Reset Hydraulic Controller Is designed for slow-reacting control applications that require stability. A group of controllers are supplied from a separate, but common power supply. The controller has a practical output range of approximately 235 to 45,000 pounds of force at the actuator. Model 13210 accepts pressure or differential ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Five Gallon Reservoir, 125 to 230 PSI, Mounting for Two Controllers, External Pump for Easy Maintenance, 1/2 Horsepower Pump, Meets JIC Standards, 0.8 to 4.0 ...
Manufactured by:CCI Breiding GmbH based inSchwerte, GERMANY
Our patented roller grate bar decreases the risk of unscheduled downtimes through an ingenious interlocking system. The tongue-and-grooves connect the roller grate bars to each other. Currently the patented WVT Breiding roller grate system is in operational use in about 2/3rd of the plants in Germany and the Benelux ...
Manufactured by:LAMTEC America Inc. based inHastings, MINNESOTA (USA)
The BT300 BurnerTronic Series combustion controllers are specially designed for small commercial monobloc burner applications. Optional expansion modules enable systems to be individually configured to meet specific application ...
Manufactured by:Swebo Bioenergy based inBoden, SWEDEN
The SWEBO S-series comprises a number of different smart storage tank modules, which are each driven by hydraulic scrapers, to allow the least expensive storage tank (S6) to be constructed in kit form, measuring 2.8 x 1.2 metres (max. 2 wide) and with 2 different wall heights. The storage tank is supplied unassembled, for an inexpensive but high quality solution. The storage tank can handle loads ...
Manufactured by:TEM AG based inChur, SWITZERLAND
The SE 6331 FSK is an c and stoves. Controls and monitors the combustion process. Combustion regulation by fan control. Flexibly parameterizable ...
Manufactured by:Ulma AB based inSvenljunga, SWEDEN
Despite the low price we manufacture the burner entirely in our own factory in Sweden Ulma Eco 2 is a reliable and robust burner with a proven igniter that ignite fast and is long lasting. The burner is equipped with an advanced control unit that controls combustion so that good operating economy is achieved. The burner can run from 6-30 kW. We also have mounted our popular touchscreen display ...
by:Shell Cansolv – Gas absorption solutions based inThe Hague, NETHERLANDS
Shell Mysella S3 N is a long-established and well-proven product. It is used extensively in all types of four-stroke engines burning natural and sour gas, in dual-fuel (diesel-pilot-fuel) engines and in gas compressor ...
Manufactured by:Tama Aernova SpA based inPredaia, ITALY
The by-pass is a filter protection system with the purpose of avoiding air input at temperatures that are too high, with the risk of compromising the functionality of the components inside the filter, and too low temperatures, to avoid condensate ...
Manufactured by:Industrial Textiles & Plastics Ltd. (ITP) based inEasingwold, UNITED KINGDOM
FlameOut Block is polyethylene-based vapour control layer with a mono-filament reinforcement scrim to provide excellent tensile strength in wall and roof installations. Available in two grades, this VCL is independently tested to British and international flame-retardant standards, with a Euroclass B,s1-d0 fire ...