Refine by
Cooling Heating Equipment Supplied In Poland
43 equipment items found
Manufactured by:FAMET S.A. based inKędzierzyn-Koźle, POLAND
Air coolers are the heat exchangers where as the coolant the atmosheric air is applied. Due to the availability of cheap coolant which is air, air coolers are widely used in chemical and petrochemical industry, refinery, power and gas industry. FAMET is manufacturing air coolers for over 35 years. FAMET has extensive know-how and well experienced staff, high quality software for process and ...
Manufactured by:KAN sp. z o.o. based inBialystok, POLAND
System KAN-therm Tacker is a complete installation system, designed for the construction of underfloor heating and cooling installations in wet method. In System KAN-therm Tacker, pipes are attached to the thermal insulation with special clips using a special tool – a ...
Manufactured by:Chore-Time Brock International - a division of CTB, Inc. based inMilford, INDIANA (USA)
Chore-Time's Energy-Efficient ENDURA® Fan could save 14% or more in energy costs compared to Chore-Time's own great-performing 137.2-cm (54-inch) High-Capacity Fan, often while using the same number of fans! . All ENDURA® Fan components were designed by Chore-Time to maximize overall fan ...
Manufactured by:Grundfos based inBjerringbro, DENMARK
The Grundfos MIXIT valve unit is designed for heating and cooling systems. MIXIT features temperature control, application specific settings, eco functions, such as balancing limiters and pressure independence, as well as access to the Grundfos BuildingConnect Free Monitoring ...
Manufactured by:MAHLE GmbH based inStuttgart, GERMANY
For diesel engines, the functional range of the MAHLE fuel filter modules can be rather complex. The fuel can be cooled or heated, for example, or the water content of the fuel can be ...
Manufactured by:Grundfos based inBjerringbro, DENMARK
The MAGNA3 D circulator pump means double the performance and reduced downtime. The two pumps communicate wirelessly and connects directly with the Grundfos GO app via ...
Manufactured by:Seco/Warwick S.A. based inSwiebodzin, POLAND
SECO/WARWICK roller hearth furnaces are designed to heat treat a wide variety of products economically with uniform, repeatable results. There’s a wide range of sizes of electric or fuel-fired heating systems with matched cooling sections and material handling systems. Coupled with protective atmosphere to keep product clean or to assist ...
Manufactured by:Grundfos based inBjerringbro, DENMARK
The MAGNA1 D circulator pump is ideal for basic performance needs in heating and cooling application. The pump offers peace of mind due to the security of supply obtained by having a redundant pump, resulting in improved uptime. The two pumps communicate ...
Manufactured by:Munters based inAmesbury, MASSACHUSETTS (USA)
Des Champs heat exchangers offer designs utilizing plate counterflow heat exchangers, heat pipe, and energy recovery wheels. These heat exchangers form the backbone of many system configurations and can be configured with unique traversing frost prevention. Des Champs heat exchangers have been used everywhere from the hottest climates to ...
Manufactured by:HEXONIC Sp. z o.o. based inWarszawska, POLAND
The L series brazed plate heat exchangers are a perfect solution for heating and cooling installations. Permanently connecting heating plates during the brazing process in the vacuum furnace guarantees reliable operation at low operating costs. Extensive heat exchange area allows for highly efficient operation in ...
Manufactured by:Gebwell Ltd. based inLeppavirta, FINLAND
Taurus EVI is a tandem heat pump with two EVI compressors and a controller with IoT features. Taurus EVI Heat Pump is an excellent choice for heating large properties. The heating output of the pump is high even at high condensation temperatures. The compressor recovers excess heat from the fluid line, which is then used to vaporise the refrigerant into the compressor’s low pressure block. ...
Manufactured by:Regess Sp. z o.o. based inJelenia Góra, POLAND
Reduction of the costs by up to 75%, independence of fuel type, environmental-friendly system – these are the most important advantages of heat pumps. Of numerous advantages that are characteristic of heat pumps, the following are worth mentioning: lack of additional elements that have to be used in the models with traditional boilers, small overall ...
Manufactured by:Regess Sp. z o.o. based inJelenia Góra, POLAND
Reduction of the costs by up to 75%, independence of fuel type, environmental-friendly system – these are the most important advantages of heat pumps. Of numerous advantages that are characteristic of heat pumps, the following are worth mentioning: lack of additional elements that have to be used in the models with traditional boilers, small overall ...
Manufactured by:Kolmeks Oy based inTurenki, FINLAND
Close-coupled pumps for heating, cooling, primary circulation, chilled water and various industrial applications. ...
Manufactured by:Ruland Engineering & Consulting GmbH based inNeustadt/Weinstraße, GERMANY
Products must be microbiologically safe and therefore durable. This is why almost every industrially manufactured product is thermally treated. However, heating and cooling is by no means simple: The optimal process, the design and selection of the heat exchangers largely depend on the characteristics of your product: They depend on its ...
Manufactured by:Grundfos based inBjerringbro, DENMARK
The Grundfos MAGNA1 circulator pump is ideal for basic performance needs in heating and cooling applications. The pump offers basic system control and monitoring and can communicate via a fault relay and digital ...
Manufactured by:Gebwell Ltd. based inLeppavirta, FINLAND
More and more in Europe, especially in the Nordic countries like Finland, also cooling of large buildings is being centralized. District cooling is produced in a centralized production facility. The cooled water produced in the plant is delivered via pipelines to cool down the air conditioning in several buildings. ...
Manufactured by:TG-Machines Sp. z o.o. based inOstrowiec Swietokrzyski, POLAND
The paddle dryer is suitable for heating, drying, cooling, and sterilizing materials for various industrial applications. The machine uses conductive heat with a horizontal mixing mechanism, so continuous operation is possible to maximize production ...
Manufactured by:Grundfos based inBjerringbro, DENMARK
Grundfos TP pumps are single-stage, close-coupled in-line centrifugal pumps with mechanical shaft seal and primely for applications such as heating/cooling/district energy. The pumps are fitted with fixed speed ...
Manufactured by:ZENNER International GmbH & Co. KG based inSaarbrücken, GERMANY
The zelsius C5 IUF ultrasonic heat meter and cooling meter operates with an innovative ultrasonic technology, specially developed for domestic energy measurement and district heating. The ultrasonic heat meter/ cooling meter zelsius C5 IUF with ultrasonic flow sensor is, thanks to a combination of modern ...