Refine by
Explosion Proof Convection Heater Equipment & Supplies
13 equipment items found
Manufactured by:US Chemical Storage - A Justrite Group Company based inWilkesboro, NORTH CAROLINA (USA)
Explosion Proof Convection Heater. UL Listed Explosion Proof Convection Heater 12,292 BTU/hr with thermostat. Class 1, Division 1 & 2, Groups C & D. Other configurations ...
Manufactured by:INTERTEC based inNeustadt an der Donau, GERMANY
The MINITHERM CLA xx SF or CLA heater consists of a block with fins and a connection cable, which is heated by a PTC cartridge. The heat is transferred from the fins to the surrounding air. Ensure effective convection by observing the recommended clearances above and below the heater. Take care not to cover the ...
Manufactured by:Masterwatt based inPianezza (TO), ITALY
The UNIT HEATER (Type 80÷700) are electrical resistance heaters coupled to a ventilation fan that designed to tailor the customer’s specific needs. The main application are winterization of technical room container or control panel. We can install from 0,5kW to 240kW with maximum overall dimensions up to 1800×1800 of flow section area. The heating elements are finned to ...
Manufactured by:Hazloc Heaters based inCalgary, ALBERTA (CANADA)
The XEU1 series of explosion-proof electric unit heaters are designed to meet U.S. and Canadian certification standards (CCSAUS).The three sizes of XEU1 heaters include our ExCaliber™ high performance liquid-to-air heat-exchanger cores that are available in 29 model choices of voltage and heat output combinations to meet your specific ...
Manufactured by:Hazloc Heaters based inCalgary, ALBERTA (CANADA)
The AEU1 series are CE Marked and certified for hazardous locations to meet ATEX and IECEx requirements. They have also received the Eurasian Conformity (EAC Ex) Mark certifying them for hazardous locations to the new Customs Union Technical Regulations. The three sizes of AEU1 heaters include our ExCaliber™ high performance liquid-to-air heat-exchanger cores that are available in ...
Manufactured by:Indeeco based inSt. Louis, MONTANA (USA)
Indeeco’s explosion-proof flanged immersion heaters are one of the most widely used solutions for heating fluids and gases in hazardous locations. CSA approved for Class 1, Division 1, Group B, C and D locations and/or approved for ATEX, UKCA and IECEx Zone 1 and/or Zone 21 locations. Indeeco’s explosion-proof flange heaters are designed for use in tanks, vessels, and in-line ...
Manufactured by:Masterwatt based inPianezza (TO), ITALY
These heaters have been designed to operate safely in environments with a potentially explosive atmosphere. They comply with the requirements of the European specifications EN 50014 and EN 50018 as well as of the European Directive 94/9/CE (ATEX Directive). The certification has been released by C.E.S.I. (Centro Elettrotecnico Sperimentale Italiano). Masterwatt is able to realize Ex certified ...
Manufactured by:INTERTEC based inNeustadt an der Donau, GERMANY
The very versatile MICROTHERM line consists of electric heaters designed to heat the air in the enclosure by convection. Wherever possible, a heater designed for temperature class T3 should be selected. A temperature fuse is integrated in the heater that cuts off the power in case of a technical failure or excessive heating resulting from an external heat source. It should be noted that the ...
Manufactured by:Masterwatt based inPianezza (TO), ITALY
The electric duct HEATERS are designed to be inserted into ventilation ducts or tubes and are directly flown by the process air or gas. The heating elements are finned to increase the heat exchange. However, if the heated fluid contains particles which could clog the fins, the duct heater is manufactured using smooth heating elements. Masterwatt has acquired very high capability to install up to ...
Manufactured by:Heatrex based inSt. Louis, PENNSYLVANIA (USA)
CSA Approved for Class I, Division 2 locations where a hazardous gas is occasionally present. Ignition temperatures as low as 392°F (200°C) for ducts up to 240″ (610 cm) wide by 120″ (305 cm) high. Ratings up to 1000 kW, 600 ...
Manufactured by:Delta T based inPico Rivera, CALIFORNIA (USA)
Flanged Immersion Heaters, both round flange and square flange models are available for applications requiring larger wattages. Flanged heaters are made from tubular heaters or Mighty blade elements brazed or welded into a pipe flange. They are used in large capacity vessels, high pressure applications and are installed by bolting the unit to a matching flange welded to the vessel wall. The ...
Manufactured by:Heatrex based inSt. Louis, PENNSYLVANIA (USA)
CSA Approved for Class I, Division 2 locations where a hazardous gas is occasionally present. Ignition temperatures as low as 392°F (200°C) for ducts up to 240″ (610 cm) wide by 120″ (305 cm) high. Ratings up to 1000 kW, 600 ...
Manufactured by:Easy Kleen Pressure Systems Ltd based inEdmonton, ALBERTA (CANADA)
Pump: Industrial Duty General triplex plunger pump with oil bath crankcase, stainless valves and all brass manifolds, most pumps are belt driven although we do offer flange and coupling driven pumps as well. Motor: Heavy Duty full 1.15 service factor TEFC 1750 rpm overload protected high efficiency Electric motors. Other: Liquid filled pressure gauge, Fully adjustable pressure regulator and ...