Refine by
Hydraulic Testing Equipment & Supplies
31 equipment items found
Manufactured by:Steam House Ltd based inPetite Rivière, MAURITIUS
Boiler SupeRAC AR-C supplied in 5 parts preassembled, suitable for introduction in heating plants with small entry passages. Assembly, welding and hydraulic test have to be executed on site from qualified ...
Manufactured by:Hesco Mildura Pty Ltd. based inMildura, AUSTRALIA
At Hesco we service Mildura and Sunraysia with their hydraulic and pneumatic needs from our stock of well known and respected brands. We can repair most brands of hydraulic equipment in house with our machining and hydraulic testing facilities. If we find that the components are beyond repair we can suppy you with new components ...
Manufactured by:Tinytech Plants based inRajkot, INDIA
Every boiler is tested at 600psi on hydraulic testing machine. Working pressure is 160psi. Insulated with cera wool on all side. Water feed pump is included. Accessories – Water level gauge set, pressure gauge, safety valve, 20ft chimney 1 set+ interconnecting pipe lines, valves, pipe fitting ...
Manufactured by:Cascade Corporation based inFairview, OREGON (USA)
Designed for the warehousing, beverage, white goods, appliance and electronics industries, the WG Model clamps allow palletless handling, which improves warehouse space utilization. The WG model features and a variety of options result in improved productivity and less product ...
Manufactured by:Bimal, Brand of Test Industry S.r.l based inPonte Valleceppi (PG), ITALY
BI703 FLEX is a machine for impulse test of hydraulic rubber flexible hoses static or with flexing and rotation in accordance to the following Norms: Square impulse waves: SAE J343 ISO 6803 ISO 6605. Impulses with peak: ISO 6772. Impulses with flexion: ISO8032 (half omega). ...
Manufactured by:Hexagon Purus ASA based inAlesund, NORWAY
Profound safety & quality culture: Our in-house test capabilities for most relevant requirements (hydraulic, leak, burst testing, bonfire, penetration, permeation) ensure highest safety and quality ...
Manufactured by:Bimal, Brand of Test Industry S.r.l based inPonte Valleceppi (PG), ITALY
Test stand for helicopters' tail and intermediate gearboxes. This machine is designed to perform production tests with nominal power/torque/speed; overspeed tests with 125% of nominal speed at the nominal power; fatigue tests and factored fatigue ...
Manufactured by:CEMET Ltd. sp. z o.o. based inGdańsk, POLAND
Cemet Ltd offers the production of machines for the offshore industry, complete with hydraulic and electric outfitting and with a full suite of necessary functional, pressure and other tests, including the FAT. Of course, strict quality standard are followed at all production stages. The welding work is supervised by our welding engineer, our quality inspectors ...
Manufactured by:Universal Hydraulik Gmbh based inNeu-Anspach, GERMANY
Universal Hydraulik GmbH offers customers over thirty years of experience in building power units. These power units are planned and designed according to our customer requirements. We produce oil reservoirs from 10-10,000-liter and electrical power from 0,25 to 160 kW. We only use pumps, valves and electrical components from major international ...
Manufactured by:Flovex S.r.l. based inGrezzago Milano, ITALY
The model ST 80 is the result of evolution of this exchanger, giving the most as thermal efficiency, compactness, combined with extreme ruggedness. Using our patented system of elastic sealing, the ST 80 has become exceptionally safe against thermal shock and ...
Manufactured by:Zeco Di Zerbaro & Costa & C. S.r.l based inFara Vicentino (Vicenza), ITALY
Reliable turbine for medium hydraulic head and flow rates. High efficiency due to the possibility of regulating wicket gate according to the available flow rate. Supplied with runner directly hanged over to the generator shaft for a compact solution, wired on a single frame, ready to be installed downstream of the penstock and started ...
Manufactured by:UK Flowtechnik Ltd based inNottingham, UNITED KINGDOM
The RS Helical Screw flowmeter excels in its own right being highly accurate (+/- 0.5% of reading) and ideal for pump/valve testing and hydraulic cylinder positioning such as revolutionary wave-power devices and aerospace fuel valves and pumps to name but a few. The design of the helical rotors gives a low pressure drop and low shear compared to circular gears ...
Manufactured by:NGK Insulators, Ltd. based inNagoya, JAPAN
Insulators are essential to the safe and stable distribution of electricity generated at power plants. Suspension insulators support transmission lines on steel towers, isolating the lines from the tower. They play a key role in the safe supply of electricity. Based on the transmission voltage and usage environment, suspension insulators are used in configurations of two or ...
Manufactured by:Etaeval GmbH based inHorw, SWITZERLAND
Thermodynamic efficiency measurements are performed to determine the absolute efficiency of hydraulic machines. The procedure for such a measurement is described in detail within the IEC (International Electrotechnical Commission) standard 60041 "field acceptance tests to determine the hydraulic performance of hydraulic turbines, ...
Manufactured by:Neron Pumps based inRanica, ITALY
The hydraulic power pack can be used in rescue vehicles, demolition equipment, mining machinery and hydraulic supports, test rigs, etc. Full utilization of all hydraulic equipment on site in case of mobile independent kit Neròn can supply a powerful power pack with gas engine. The gas engine will supply to the ...
Manufactured by:Etaeval GmbH based inHorw, SWITZERLAND
Index measurements are carried out to determine the relative efficiency (index efficiency) of hydraulic machines. The procedures for index measurements and the different approaches are described in the IEC (International Electrotechnical Commission) standard 60041 "field acceptance tests to determine the hydraulic performance of ...
Manufactured by:Leak-Proof Engineering (I) Pvt. Ltd. based inMumbai, INDIA
Series LPTSO7 is used as a storage & unpressurising unit. Used for double mechanical seals in tandem seal arrangement. This is equipped with cooling coil inside the shell to bring down the temperature of buffer fluid coming from seal to Thermosyphon Vessel. Higher capacity upto 20 ltr. can also be ...
Manufactured by:HYDAC Technology Corporation based inBethlehem, PENNSYLVANIA (USA)
The CS 1000 Contamination Sensor is the latest HYDAC development for continuous measurement of solid contamination of fluids. Using the latest technology and materials, the CS 1000 is a reliable measuring instrument that is permanently mounted on your mobile or industrial ...
Manufactured by:Super Radiator Coils based inRichmond, VIRGINIA (USA)
The formation of ice crystals within the gas turbine air inlet system creates damage risk for gas turbine airfoils. Super Radiator’s turbine inlet anti-icing coils utilize hot fluid to ensure ice crystals do not form and cause costly damage and downtime. These coils are designed to minimize air pressure loss while preheating the air with inlet temperatures as low as -70°F ...
Manufactured by:Max Machinery, Inc. based inHealdsburg, CALIFORNIA (USA)
If you value your flow, find value in the data from a Max Gear Meter. From heavy duty hydraulics to adhesive dispensing, Max Gear Meters provide more data per liter of fluid to give you more control of your flow. Choose from frequency or analog transmitter options. High temperature models up to 225°C available. CE Certified, Ex-proof version available with ATEX/IECEx and UL/cUL ...