Show results for
Refine by
Light Multifunction Support System Equipment Supplied In Denmark
13 equipment items found
Manufactured by:MEYER CD ApS based inGlostrup, DENMARK
When weight and trim is a critical consideration for your application, the HDRX-R450 is the perfect solution. Light and compact in design – made for now and future solutions. HDRX-R450 additionally offers full customization and direct mounting to the Hydrogen supply. The HDRX-R450 offers accurate control in a single- or two-stage pressure reduction. With an inlet pressure of 450 bar / 6,750 ...
Manufactured by:Vestas Wind Systems A/S based inAarhus N, DENMARK
With the introduction of V155-3.6 MW™, Vestas expands the 4 MW platform to strengthen park performance in low and ultra-low wind ...
Manufactured by:Alimak Group Denmark A/S based inThem, DENMARK
Avanti has produced ladders since 1885, and for more than 2 decades Avanti Wind Systems has produced ladders in aluminum for the Wind Turbine Industry. With great success – Avanti’s ladders can be found in turbine towers all over the world. The Avanti Ladder is a safe and rigid structure. The design is optimized ensuring strength in the stiles, in the rungs and in the connections ...
Manufactured by:Vestas Wind Systems A/S based inAarhus N, DENMARK
The V162-7.2 MW™ features flexible rating, designed to deliver optimised energy production even with greater temperature and climate variations. Designed with full value chain in mind, the V162-7.2 MW™ realises improved transportability of the nacelle unit, as well as the flexibility to service and upgrades over the turbine’s operational ...
by:Polytech based inBramming , DENMARK
Our Lightning Key Data System, LKDS®, is a unique wind turbine lightning measurement system that measures and records lightning events in real time. If you know in real time exactly where lightning strikes, then there is no need to stop for inspection. You either keep your blades spinning because there was no damage, or you stop them to fix what you now know needs to be fixed. You can ...
Manufactured by:Vestas Wind Systems A/S based inAarhus N, DENMARK
The V172-7.2 MW™ is designed for low to medium wind conditions and offers expanded site applicability through flexible ...
Manufactured by:Water ApS based inFarum, DENMARK
Transmission of UV-light at 254nm is a widely used method in both clean and wastewater applications (APHA, 2012). Water transparency is commonly used as an indicator of general water quality and is described by UVA, which represents the amount of light absorbed by particles within a sample. The removal of carbon-based compounds (e.g. NVOC, COD and fluorescent organic matter) resulted in visually ...
Manufactured by:Twin Heat A/S based inGedsted, DENMARK
In addition to the fuels for which it has technical approval the CS system is also designed for burning light fuels such as wood chips, sawdust and wood shavings and it can be combined with one of Twin Heat's fully automatic silo ...
Manufactured by:Vestas Wind Systems A/S based inAarhus N, DENMARK
The V150-6.0 MW offers a large operational envelope, optimising production in medium to high wind ...
Manufactured by:Vestas Wind Systems A/S based inAarhus N, DENMARK
The V162-6.2 MW™ is designed for low to medium wind sites and has extensive application in high wind ...
Manufactured by:Cimbria A/S - part of AGCO Corporation based inThisted, DENMARK
More than twenty years ago SEA launched on market the first electronic sorter for glass recycling. In fact, in 1989, SEA designed and installed its first sorter to remove ceramic, stones and other contaminations out of Italian glass cullet. Thanks to the experience acquired with this “difficult” glass cullet, notoriously showing a really high concentration of contaminations, as well ...
Premium
Manufactured by:NIVUS GmbH based inEppingen, GERMANY
High Accurate Flow Meter + Energy Saving Capabilities for Pump Stations. NIVUS has for decades operated in the field of water and wastewater and feels responsible for protecting the environment. With our smart measurement systems we offer carbon savings of up to 80% compared to conventional measurement methods. In collaboration with a major UK water company we have developed a new measurement ...
Manufactured by:Carbolite Gero Ltd - part of Verder Scientific based inHope, UNITED KINGDOM
The CAF G5 is a furnace designed to test ash fusibility, and optionally, the increasingly popular determination of biomass or solid recovered fuels testing. The coal ash fusibility test furnace conforms to the Standards ISO 540:2008; ASTM D 1857 / D1857M – 04 (2010); DIN 51730:2007-09; DD CEN/TS 15370-1:2006 (biomass) and PD CEN/TR 15404:2010 (solid recovered fuels (SRF)). The CAF ...