Pohlcon Photovoltaic Mounting Systems Equipment Supplied In Europe
6 equipment items found
Manufactured by:PohlCon Solar GmbH & Co. KG based inBerlin, GERMANY
Our company has been one of the most successful German suppliers of PV mounting systems on the ground-mounted market for many years. However, our C and U profiles made of high-alloy steels with the characteristic rows of holes have not only been used "in the field" over the years. In fact, we have been able to realize a number of projects in the field of large flat roof and carport systems: From ...
Manufactured by:PohlCon Solar GmbH & Co. KG based inBerlin, GERMANY
Incorrectly installed support systems can cause damage to the sensitive roof cladding. The result is moisture damage inside the building as well. In order to optimally protect the roof cladding, the mounting racks we install are always placed on weather-resistant building protection mats. The triangular constructions pre-assembled on the ground can simply be placed on the building protection mats ...
Manufactured by:PohlCon Solar GmbH & Co. KG based inBerlin, GERMANY
The two-support system is a very cost-efficient solution with two vertical columns and additional bracing by a diagonal strut. Instead of one or two solid supports without additional bracing, this system creates a flexurally rigid truss via the diagonal. This has equivalent load-bearing properties while using less material. Furthermore, the bearing forces on the ground are significantly reduced, ...
Manufactured by:PohlCon Solar GmbH & Co. KG based inBerlin, GERMANY
The photovoltaic mounting system consists of only one support and a diagonally running strut and can be used worldwide. As with the other systems, the module type and arrangement can be freely selected. A characteristic feature of the system is the deliberate omission of further supports. ...
Manufactured by:PohlCon Solar GmbH & Co. KG based inBerlin, GERMANY
Orienting the modules to the east and west can make economic sense if the following applies to the planned photovoltaic system: North-south oriented systems can shade each other and must therefore be installed with sometimes quite large row spacing. This effect does not occur with an east-west arrangement: The row spacing can be reduced. The installed capacity thus increases significantly. Energy ...
Manufactured by:PohlCon Solar GmbH & Co. KG based inBerlin, GERMANY
Bifacial modules additionally use the solar radiation reflected from the ground on the back of the modules. To avoid shading of the rear side of the module by parts of the substructure and thus a loss of yield, our racks run exclusively below the gaps between the modules and thus ensure the greatest possible efficiency. The bifacial modules can be used in all system variants from single-support ...