- Home
- Companies
- Su-vastika Systems Private Limited
- Products
- Model 3 Phase 10KVA / 20KVA / 30KVA - ...
Model 3 Phase 10KVA / 20KVA / 30KVA -Heavy Duty UPS
UPS is short for Uninterruptible Power Supply, as it allows electrical load to keep running and provides power in the event of a power failure. A UPS system utilizes DC power stored in the battery as its backup source. During normal operation, the power from AC mains is directly supplied to the output through a static transfer switch. At the same time, the AC is converted to DC to charge battery. When there is a power outage and primary supply breaks, the battery stops charging and the static switch transfers the output line to the inverter side very quickly. At the same time, the inverter starts drawing current from the battery which is then supplied to the AC load. Su-vastika uses advanced static switches in its Heavy Duty UPS that reduces switching time to just 5ms, which is fast enough to keep a computer and majority of sensitive equipment from shutting down.
Because of its strong R&D and experience of its able Mentor, Su-vastika understands the power back up need of its customers across industries well.
It has designed a range of state-of-the-art Heavy-Duty UPS starting from 10KVA to 250KVA that provides
- Protection to your machinery / appliances during power surges
- High energy storage
- Fast switching technology
- Negligible maintenance cost
- Lifelong usage with long lasting batteries
Automatic Voltage Regulation
When there is Low Supply voltage or High Supply voltage, and supply rises or drops below the Safe voltage range, the Heavy Duty UPS, seamlessly switches to battery power, keeping all your machinery and equipment safe.
Soft Start System
This advanced technology gradually increases voltage to let your machinery ease-in. Preventing electrical and mechanical shocks to the sensitive and costly machinery in your facility.
Cold Start System
This specially designed feature starts the inverter in Battery Mode, in the absence of power from mains (grid power).
Automatic Temperature Compensation (ATC)
Designed for extreme weather conditions, the Heavy-Duty UPS has ambient sensor and antenna right on it. With its (ATC), built into the microprocessor, it senses the temperature around it and makes intelligent adjustments.
Automatic Voltage Regulation
The Heavy-Duty UPS is built to keep your battery healthy. It is designed for efficient charging and discharging , hence keeping the battery running longer with reduced upkeep.
long-battery-life
The Heavy-Duty UPS can take up to 4 times its load capacity. You can rely on it to support your facility and machinery during a voltage spike. It also intelligently reminds you to turn off the extra machinery so the load is reduced.
Solar Compatible
The Heavy-Duty UPS system is solar compatible. Solar power can be used as a secondary power source or as a backup power source in case of battery discharge.
Generator Compatible
The Heavy-Duty UPS can normalise and adapt to voltage fluctuations and is compatible with your existing generator, and is the perfect option to pair with Domestic Generators.
Low Cost
The Heavy-Duty UPS is extremely cost efficient and has a low cost of set up and maintenance, compared to the generator.
No Pollution
Unlike generators, the Heavy-Duty UPS runs on batteries and is therefore completely non-polluting, no-fumes, no-noise and can be comfortably placed in any commercial facility.
TYPE: 3 PHASE IN - 3 PHASE OUT
- SERIES: Pure Sine Wave Inverter
- TECHNOLOGY: DSP based PWM technology using IGBT
- RATINGS: 10kVA -20kVA - 25kVA - 30kVA
- MODEL NO.: CL3310K - CL3320K - CL3325K - CL3330K
INPUT PARAMETERS
- INPUT SUPPLY: 3 Phase 4 Wire
- VOLTAGE RANGE: 145V - 270V
- FREQUENCY RANGE: 45-56Hz
- POWER FACTORY (CHARGING): 0.80
OUTPUT PARAMETERS
- VOLTAGE REGULATION: 230 V ± 2% (P-N), 400 V ± 2% (P-P)
- FREQUENCY REGULATION: 50Hz ± 0.1Hz
- PEAK EFFICIENCY: >92%
- OUTPUT WAVEFORM: Pure Sine Wave
- TOTAL HARMONIC DISTORTION: <3%
- CREST FACTOR: 3:01
- TRANSIENT RESPONSE: Recovery to ± 5% within 1.5 Cycles
- OVERLOAD HANDLING CAPACITY: 110% for 5 Mins, 150% for 15 Secs, 200% -for 4 Secs, 300% for 2 Secs
BATTERY PARAMETERS
- BATTERY TYPE: LA/TUBLAR/SMF
- BATTERY VOLTAGE (NOMINAL): 180V/ 240V/ 360V DC
- BATTERY CHARGING CURRENT: 3A ± 0.5A to 20A ± 0.5A - 10A ± 0.5A to 150A ± 2.0A
USER INTERFACE
- COMMUNICATION PORT: RS-232 Server & Client
- OPERATING SYSTEM: Windows 95/98/NT/2000/XP/2003 Server
ENVIRONMENTAL PARAMETERS
- OPERATING TEMPERATURE: 0-55° C
- ACOUSTIC NOISE (AT 1MTS): <65db
- RELATIVE HUMIDITY: Max 95% non - condensing
OTHERS
- INDICATIONS AND ALARMS: Backlite 16 x 2 Lines LCD Screen with Indication, Alarms & Remedy
- PROTECTION CLASS: IP 20