Model P1 - Gate Reader
P1 port is a connection to a smart meter. A smart meter is an energy meter which other meters can be connected such as gas meter, water meter, heat meter (district heating), etc. A smart meter sends all meter readings once a day to the grid operator. The network operator's data can further give to interested and authorized parties. The P1 port is a connection that was created specifically for the smart meters to enable all the data from the meters also have locally and available immediately. P1 port will send a large amount of information about one time per 10 seconds. This information includes the kWh consumption, feeding into the grid and gas consumption (if the meter is connected). P1 port reader receives the information from the smart meter and decodes this information
-
Most popular related searches
Product Details
P1 port reader is an extension of the RF LAN set.
The RF LAN kit measures the output of a solar system and transmits the measured values to a portal.
The RF LAN set consists of a measuring unit (kWh meter) and a LAN unit. The energy meter measures the power consumption or delivery, objective, accurate and independent of other equipment. The energy meter sends the measured value via a radio connection to the LAN unit. The LAN unit has an RF receiver and a memory for a series of measurements. Periodically the LAN unit transmits data to the central server for further processing.
The wireless connection is established with a separate radio link. No use is made of Wi-Fi. WiFi often has a limited range. Access to WiFi networks is regulated by passwords and any system that uses it should be set to the used passwords, which can cause problems with the installation and changes to the network (internet service provider, new router, etc.). This all is shown schematically below.
To the RF LAN set can be added to a P1 port reader.
The P1 gate reader filters out all information coming from the P1 port, a portion of the data, and these are controlled by means of a RF connection to the RF LAN set. The RF LAN set sends the information from the P1 port along with the gross production of the solar system to a portal. The information that is available than in the end is:
- production solar system
- direct use solar power in the home
- redelivery surplus solar power to the grid
- consumption from the grid
- gas consumption (if the meter is connected)
- data from any attached M-Bus meters (eg heat meters)
The P1 port can also be used in combination with only the RF LAN interface in order to read in the information from the P1 port in a portal.
Customer reviews
No reviews were found for Model P1 - Gate Reader. Be the first to review!