PowerCombo - Model 20C2H1000K - Battery Energy Storage System
From PowerCombo BESS
PowerCombo-20C2H1000K is a battery energy storage system with nominal power of 1000kW capacity of 2,064kWh, which is ideal for large scale C&I, micro-grid, distributed renewable energy stations, and other application scenarios. With modular & all-in-one design, 6 sets of S373-24P14, PCS, fire fighting system, environmental control system and BMS are integrated inside a 20ft container. With independent string management and isolated cooling system, it allows system has higher energy density while better safety and reliability guaranteed.
Features:
- Cloud-based dispatch operation platform;
- Active balancing and DC coupling, maximum efficiency more than 99%;
- Independent string management to avoid parallel mismatch;
- Adopts modular design that is easy to update, expand and maintain, reducing the cost needed for maintenance;
- Isolated hot/cool air dust design, with the temperature difference between batteries less than 3?;
- Provides status notifications, alarm alerts and real-time response protection strategy in cases of emergencies to ensure system reliability and safety;
- UL9540A, UL1973, IEC62619, CE, UN38.3 certificated.
Details
Capacity Compensation
In the case that the user-side load is higher than the capacity coming from the grid, PowerCombo BESS employs a dispatch strategy to automatically compensate capacity to the power distribution system and improve the voltage quality on the user side.
Load Shifting
Store energy in off-peak hours and discharge it during peak hours, to reduce electricity costs by partially replacing expensive peak electricity.
Sizable Income
Establish good interactions with the power grid partners by getting involved in demand response programs. Contribute to reduce peak load and get incentives from the grid.
Smooth Output Curve
Ensure that renewable energy can be easily dispatched. PowerCombo BESS will discharge energy when in need, to shave load spikes and reduce the use of grid power during peak hours.
Better Utilization of Renewable Electricity Generation
Fully leverage the flexible energy storage system to increase the consumption of electricity generated from renewable energy sources and reduce the curtailment of wind and solar power,to alleviate the stress on the grid during peak and valley hours.
Backup Power Supply
PowerCombo BESS can be used as a backup power supply in the event of a sudden power outage. The discharge mode will be instantly switched on to offer support to critical loads and safeguard the normal operation of critical loads.
Specification
- DC Data :
- Cell type : Lithium Iron Phosphate (LFP)
- Cell life cycle : 80% Retention with 5,000 Cycles @ 0.5C 25?
- Cell spec : 3.2V/280Ah
- Rack rated energy capacity : 2,064kWh
- Rated voltage : 1,228V
- AC Data :
- Rated AC power : 1,000kW
- Rated grid voltage : 690V
- Maximum AC power : 1,320kW
- General Data :
- Dimension w/o clearances(L*W*H) : 6,058*2,438*2,591mm
- Weight of whole system : <25t
- Degree of protection : IP65
- Operating temperature range : -20~40?
- Max working altitude : 4,000m/13,123ft
- Communication interfaces : RS485, Ethernet, GPRS
- Certificates : UL1973, UL9540A, IEC62619, CE , UN38.3
Customer reviews
No reviews were found for PowerCombo - Model 20C2H1000K - Battery Energy Storage System. Be the first to review!