Seraphin Test Measure
- Home
- Companies
- Seraphin Test Measure
- Products
- Seraphin - Model EESS0020L-VRTM - 20L ...
Seraphin - Model EESS0020L-VRTM -20L Test Measure System
The test measure is equipped with a high resolution 3 in. neck with reducer and is used with a mating vapor retention funnel. This equipment, when used together, is designed to minimize vapor loss dur- ing inspection by maintaining a saturated vapor space in the test measure.
Most popular related searches
- CONSTRUCTION: Built to Measurement Canada Standards
- CALIBRATION: Factory Calibration by standards traceable to National Institute of Standards and Technology
- NOMINAL CAPACITY: 20 LITER - Calibrated "to deliver" at 15 Deg C
- NOMINAL HEIGHT: 28 INCHES
- WEIGHT (DRY): 18 LBS
- APPROXIMATE SHIPPING: 14" W X 14" L X 33" H 20 LBS BOXED
- MATERIAL: TYPE 304 STAINLESS STEEL
- NECK EXTENSION: REDUCED THE NECK DIAMETER TO A 2 INCH DISPENSING SPOUT
- DESIGN: REINFORCING BANDS TO PREVENT DISTORTION OF PROVER WHEN FULL WITH LIQUID AND WHEN BEING TRANSPORTED.
- GAUGE ASSEMBLY: EQUIPPED WITH A (LIQUID -LEVEL) GAUGE TUBE MOUNTED ON THE SIDE OF THE NECK
- VOLUME INDICATION: ALUMINUM GRADUATED SCALE
- SCALE RESOLUTION: 10ML INCREMENTS
- REQUIRED SCALE RANGE: ± 200 ML. THE GAUGE SCALE SHALL BE GRADUATED BOTH ABOVE AND BELOW THE NOMINAL CAPACITY GRADUATION BY AN AMOUNT NOT LESS THAN 1.5 % OF THE PROVER VOLUME
- TOLERANCE: 0.02% SCALE ACCURACY
- GAUGE GLASS FITTING: SILICON BRONZE
- HANDLE: BAIL TYPE WHICH WILL HANG WITH ITS AXIS VERTICAL WHEN FILLED WITH LIQUID
- GRIP: RUBBER GRIP ON TEST MEASURE HANDLE
- BOTTOM: CONCAVE AND OF ADEQUATE THICKNESS TO PREVENT DISTORTION WHEN FILLED