Van der Valk Solar Systems BV

Solar Tracker

SHARE

Open fields are highly suitable for the placing of solar installations. The ValkSolarTracker doubles the yield of a fixed installation. Along with more kWh per kWp, the ValkSolarTracker also ensures a more constant energy production throughout the day. The system described below can be mounted on any type of ground. Using screw piles, concrete pads, driven piles or ballast, you always have the right foundation for your situation.

Most popular related searches

ValkSolarTracker

Unique to this system:

  • Highest realisable yield through east west tracking
  • Modular system, with up to 8 units coupled to one motor (64 panels)
  • Control based on solar cycle algorithm
  • Low maintenance as there are few moving parts and electronic components
  • Periodic inspection suffices
  • Any tilt angle possible
  • Very durable construction

Fixed system versus Solar Tracker

Compared to a fixed installation, the purchase of a solar tracker requires a greater investment. It is easily earned back within a few years, though. This is the result of a much higher energy yield (see figure 1) as well as less usage from the grid (see figure 2). The exact payback period varies from country to country and is partly dependent on the number of hours of sunlight, the local energy cost and the energy consumption.

Foundations Solar Tracker systems The ValkSolarTracker is applicable to any type of surface. Depending on the nature of the surface, the foundation can be secured by screw piles, concrete pads, driven piles or ballast in the form of concrete bars. The primary aim is to achieve maximum stability