Only show results available in Virginia? Ok

Photovoltaic Cells equipment for Solar Energy

  • Premium

    Model MP-180 I-V - High Precision Tracer

    The high precision MP-180 I-V tracer is the ultimate research instrument for Photovoltaic cell development and quality inspection purposes. Its wide input range (µA - A) makes the MP-180 a unique all-round measurement device suitable to test all types and sizes of Photovoltaic cells.

    By EKO Instruments based in San Jose, CALIFORNIA (USA). from Solar Energy - IV Measurements Product line

  • Solar Photovoltaics

    Solar power is unique. The only proven system of clean energy generation that can be used safely in towns and cities, in remote homes and rural villages, in vehicles, out and about, at home and at work. No moving parts, little or no maintenance, no fumes - it even works when the sun isn't visible!

    By Agreenergy Limited based in Cardiff, UNITED KINGDOM.

  • Micromorph Thin-Film Solar Cells

    Micromorph thin-film solar cells combine both amorphous and microcrystalline silicon in one cell and belong to the group of the so-called multi-junction cells for which two (tandem cell) or more semiconductor layers are deposited alternately one above the other. As for micromorph silicon tandem cells, the absorption spectra of amorphous and ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • Model ENERGIA - Solar Modules

    Modern modules are made with high efficiency multi / mono crystalline solar cells (i.e. 15% to 17%). These cells are encapsulated between a low iron content high transitivity tempered glass and premium quality back sheet to provide efficient protection from the environmental conditions. The laminates are framed with strong, robust and anodized ...

    By Modern Solar Pvt. Ltd based in Kolkata, INDIA.

  • Model PM10 - Solar Photovoltaic Modules

    CEL’s Solar Photovoltaic Modules, type PM10 are manufactured using Mono Crystalline Silicon Solar Cells. These are high quality and high performance modules suitable for power generation. These modules have excellent durability to withstand extreme temperature and weather conditions of the high altitudes, deserts and coastal regions.

    By Central Electronics Limited based in Sahibabad, INDIA.

  • Photovoltaic Panels

    The cells come onto the assembly line in graded Boxes. We only put grade “A” cells into our Panel(Module). We do not cut the cells when making High Wattage Panels(120 Watt and up). Before stringing up, the cells are re-sorted for color consistency. Then they are soldered into a string (in an “electrical” series). There are ...

    By EcoSunPV based in Mississauga, ONTARIO (CANADA).

  • Photovoltaic (PV) Solar Power Panel

    A Photovoltaic (PV) Panel consists of groups of solar cells made out of silicon. When the sun shines onto the solar cell, electrons are forced from the positive bottom layer of the cell, to the negative top layer at the top of the cell and onto lead tracks printed on the cell surface. As the photovoltaic cell goes through this electron flow, a ...

    By Green Earth Consulting Services based in Cape Town, SOUTH AFRICA.

  • Solar Photovoltaic Cells

    USL manufacturers high performance low-cost silicon solar cells that are designed for terrestrial applications. These solar cells have screen-printed silver front side and screen-printed silver-aluminum back side for better soldering. Textured front surface makes it possible to collect maximum sunlight and hence improved performance.

    By Udhaya Semiconductors Limited based in Coimbatore, INDIA.

  • Model D6F - Mono-crystalline Photovoltaic Cell

    A full range of cell processing, including.Mono- and Multi-crystalline Silicon-based cells.6 inch cell size with 3 busbars.Wafer thickness of 180 to 200 μm.High efficiency and thin wafer handling capabilities.Dynamic optimized setting system.Soft-touch wafer handling system.Robust-in-house automation systems.Improved quality, efficiency and ...

    By DelSolar Co., Ltd based in Zhunan Township, TAIWAN.

  • Model JD PV BOX 0403H1 - Photovoltaic Junction Boxes And Connectors

    Bus bar connection is achieved by welding and glue is filled in soldering area.This method prevent the cell heat from being transferred to box body and thus causing diode break down.13ml glue to be used for filling,much lower in volume and cost than other products on the market.

    By JiangSu JiuDing Solar Energy System Co., Ltd based in Changzhou, CHINA.

  • Model Genius AS series - Thin-Film Module

    Genius AS thin-film module With the Genius AS|zentralsolar deutschland adds to its module range based on innovative thin-film technology.When compared to modules with crystalline cells, the Genius AS series impresses with its superior performance in low-light conditions.This benefit pays off especially in photovoltaic systems that are not ...

    By ZSD GmbH zentralsolar deutschland based in Emsbüren, GERMANY.

  • FVG - Model 60-156 - Monocrystalline Silicon Photovoltaic Module

    The FVG 60-156 photovoltaic modules are indicated for network feed-in systems, including: Electric power stations, medium and large photovoltaic parks, systems on offices and commercial buildings, residential centres and single residential buildings. The system voltage up to 1000 VDC can be used on any type of system connected to the network. FVG ...

    By FVG ENERGY based in Carlino, ITALY.

  • FVG - Model 36 - Monocrystalline Silicon Photovoltaic Module

    FVG 36 photovoltaic modules are indicated for stand-alone systems, public and private lighting systems, detection and data transmission systems, road signs, telecommunications, etc. FVG ENERGY S.p.A. uses high quality materials to guarantee that the photovoltaic modules are reliable and productive during time. The use of Class “A” ...

    By FVG ENERGY based in Carlino, ITALY.

  • Model CNPV-245M to CNPV-255M - Solar Photovoltaic Module

    High Performance 60 cell Premium Mono Crystalline 156×156mm Solar Photovoltaic Module.

    By CNPV based in Shandong Province, CHINA.

  • JA Solar, - Model JA P6 60/225-250 - Souvr Photovoltaic Module

    Cell (mm) Poly 156x156.Weight (kg)19.5.Dimensions (LxWxH) (mm)1650x991x40.Cable cross section size (mm2)4.No. of cells and connections60(6x10).No. of diodes3/6.Packing configuration. 25Pcs. / Carton

    By EME Energie Management Eberlein GmbH based in Kitzingen, GERMANY.

  • Eurener - Photovoltaic Modules

    Neo photovoltaic modules are highly efficient and reliable. They are composed of 60 polycrystalline silicon cells, framed in anodized aluminium with 4,2 mm tempered glass wich guarantee high durability.Neo modules, depending on the model type, range power of 220Wp, 225Wp, 230Wp, 235Wp, 240Wp, 245Wp and 250Wp. They are IEC 61215 and IEC 61730 ...

    By EME Energie Management Eberlein GmbH based in Kitzingen, GERMANY.

  • Solar PV

    Why we Recommend Solar PV: Solar PV is a simple and highly effective technology. It is fully efficient and requires very little in the way of follow up maintenance once it’s on your roof.

    By Save Energy Group based in Poole, UNITED KINGDOM.

  • Model EGS215 to EGS260 - Solar Photovoltaic

    Dimensions  1644mm x 982mm x 40mm. Module area 1.614 m2.Weight 22.3kg. Frame Aluminum alloy. Front Tempered glass. Encapsulate EVA.Back cover Back Sheet. Cell Technology Polycrystalline. Cell Size 156mm x 156mm. Number of Cells (Pieces) 60(6x10). Junction box Protection class IP65 with bypass-diode.

    By Evergreen Solar Systems India Private Limited based in Vadamadura, INDIA.

  • Model DMS-156M-433 - 6" Monocrystalline Solar Cell

    DMS-156M-433: 100 Cells, up to 433W. High efficiency and stable performance in photovoltaic conversion. Advanced diffusion technique ensuring the homogeneity of energy conversion efficiency of the cell. Advanced PECVD film forming, providing a dark blue silicon nitride anti-reflection film of homogenous color and attractive appearance. High ...

    By Dmsolar, LLC based in Fort Lauderdale, FLORIDA (USA). from Solar (PV) Cells Product line

  • Model LC175-24M - High-efficiency PV Module

    Features: High energy yields ensured by high conversion efficiency. High current yields thanks to textured cell surface. Sturdy, clear-anodized aluminum frame with pre-drilled holes for quick installation. Embedded in reinforced glass (hail storm resistant iec 61215) and in eva foil, backing in pet foil. Pre-wired junction box equipped with ...

    By American West Windmill & Solar Co. based in Abernathy, TEXAS (USA). from Photovoltaic Panels Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you