Only show results available in Virginia? Ok

Solar Heating equipment for Solar Energy

  • Model CPC 45 Star Azzuro / XL - Evacuated Tube Collector

    Evacuated tube collector with CPC-reflector - 21 evacuated tubes for water, space and process heating, solar cooling Scope of delivery: Fully pre-assembled unit compris.

    By Ritter Group USA, Inc. based in Stroudsburg, PENNSYLVANIA (USA). from XL Solar Systems Product line

  • TiSUN - Model SHS - Solar Heating Set

    If heating is to be supported with solar energy, the SHS solar heating set is an efficient solution, with up to a 60% saving. The optimum module collector coordination, solar fresh water tank or solar stratified tank and solar control unit provide very high yields.

    By TiSUN GmbH based in Söll, AUSTRIA. from Solar Sets Product line

  • Model PM 2940/45 - Heating Controller

    Bus compatible heating control with compact design in standard housing (96x144mm). Depending on the type of control support for 1-, 2-stage or modulating boiler, 1 or 2 mixed heating circuits, domestic hot water circuit, inclusion of a storage tank and solar functionality. Each heating circuit can be extended with a remote control or adjuster. ...

    By TEM AG based in Chur, SWITZERLAND. from Heating Controller Product line

  • Tecsolar,OEM - Model TS-XX-58P(A) - Solar Collector with Heat Pipe

    58x1800mm SC tube.The heat pipe is used in Tec-solar collectors.

    By Tec-Solar Energy Industry Co.,Ltd. based in Changzhou, CHINA. from Evacuated Tube Solar Water Heater Product line

  • Ritter Gruppe - Model CPC XL INOX Series - Evacuated Tube Collectors

    The evacuated tube collector CPC XL INOX may also be used for both solar domestic water heating and for solar backup heating. The difference between this model and the CPC INOX is the 400 mm longer evacuated tube.

    By Ritter Gruppe based in Karlsbad, GERMANY. from OEM Solar Products Product line

  • SolarDuct - Model PV/T - Hybrid Solar Heating + Electricity

    SolarWall PV/T is a hybrid system which provides up to 300% more energy (in the form of solar electricity + solar heat) than a conventional solar PV system.  The heat energy captured from the PV modules is ducted into the building’s HVAC system where it is used to displace the conventional heating load. The secondary benefit is to ...

    By Conserval Engineering Inc. based in Toronto, ONTARIO (CANADA).

  • LOVATO - Model BOMBER 20 - Inertial Micro Storage Tank

    BOMBER is a inertial micro storage tank with zone distribution: its function is to work with heat pump and further support heat source. Its purpose is facilitates the functioning of the heat pump for covering the heat demand granting an optimized modulation and covers the peak loasds with the support of the ancillary heat source.

    By LOVATO S.p.A based in Gazzolo d`Arcole VR, ITALY. from Solar Stations Product line

  • Sunrain solar heating system

    Solar Heating System The Details of Solar Heating System1. Inner tank: stainless steel SUS304-0.5mm2. Outer tank: painted steel-0.4mm3. Collector angle: 30 degree4. Vacuum tube: QB-AL-N/AL-47-1500mm/58-1800mm 5. Generally speaking, we don't supply frame(But we provide galvanized angle iron frame or others, on request)

    By Lianyungang Sunrain Co.,Ltd. based in Lianyungang, CHINA.

  • Absolicon - Model MT10 - Solar Collectors

    Steam and process heat for industry.Efficient solar collector with a high degree of efficiency at high temperatures. The system is designed to run industrial processes.Absolicon MT10 generates solar heat and solar steam up to 160°C. The heat can also be used for solar cooling. Absolicon’s solar concentrator technology is based on over 20 ...

    By Absolicon Solar Concentrator AB based in Härnösand, SWEDEN.

  • Model SR 300 DUO - Charge Controller

    Charge Controller that you can connect one or more solar panels. 12 volts and 300 watts. Equipped with EBL connection. That charge controller can be connected to two batteries, for example the board and the starter battery. If the battery is full, the controller converts to trickle charge and the produced energy from the solar panel to heat. The ...

    By Beaut based in Evington, UNITED KINGDOM. from Charge Controllers Product line

  • Domestic Solar Water Heating Systems

    Puf - Insulated Tank New, innovative Tank shape Unique Tank & Collector support structure Sacrificial Anode to prevent galvanic corrosion Ultrasonic Welding of Collectors for Superior Conductivity 3 Dimensional Polymer End Cap Unique “Anti Condensation” device Available in capacities of 100, 200 and 300 LPD

    By BP Solar International Inc based in Sunbury On Thames, UNITED KINGDOM.

  • Domestic Solar Water Heating Systems

    High quality tubes made from borosilicate glass Withstands hail storms No clogging/choking Long lasting Inner coating of tubes consists of layers of copper, stainless steel and aluminium nitride Heats water to a very high temperature Makes hot water available even on partially cloudy days High quality PUF insulation for maintaining high ...

    By BP Solar International Inc based in Sunbury On Thames, UNITED KINGDOM.

  • YES - Model TSI-880 - Automatic Total Sky Imager (TSI)

    The Total Sky Imager Model TSI-880 is an automatic, full-color sky imager system that provides real-time processing and display of daytime sky conditions. At many sites, the accurate determination of sky conditions is a highly desirable yet rarely attainable goal. Traditionally, human observers reported sky conditions, resulting in considerable ...

    By Yankee Environmental Systems, Inc. based in Turners Falls, MASSACHUSETTS (USA). from Cloud Cover Product line

  • Solar Water Heating

    There are two options available for Solar Water Heating, flat bed systems and evacuated tubing. Flat bed systems were the first popular system in South Africa and work by running water through fine copper filaments set in a black, heat absorbing layer which heats the water in the filaments instead of a conventional heating element. Evacuated tubes ...

    By Green Earth Consulting Services based in Cape Town, SOUTH AFRICA.

  • PHÖNIX - Solar Stations

    The PHÖNIX solar stations include all the components necessary for optimum operation of the solar heating system.They are equipped with high quality, speed-variable pumps that increase the system yield and reduce the electricity consumption. Thermometers in the supply and return pipes show whether the solar heating system is working ...

    By PHÖNIX SonnenWärme AG based in Berlin, GERMANY.

  • Model JHC-5818 - Heat Pipe Solar Collector

    Metal Heat Pipe Solar Collector consists of a vacuum tube, a heat pipe, a metal heat absorption wing and the connecting manifold. The metal heat absorption wing with selective absorption coating converts solar energy into heat energy and transfers it medium liquid inside. The vacuum between the two glass tubes works as insulation. The liquid in ...

    By Jiaxing Jinyi Solar Energy Technology Co.,Ltd. based in Jiaxing City, CHINA. from Solar Collectors Product line

  • RESOL - Model VA300 - Changeover Valve

    The 3-port valve RESOL VA300 is used for distribution of flow rates of bivalent heat sources or heating storages, e.g. in the solar and heat pump technology (temperature of the media: up to 120 °C, only for a short time up to 140 °C).

    By Resol GmbH based in Hattingen, GERMANY. from Valves Product line

  • RESOL DeltaSol - Model BX Plus - Solar Controller

    The system controller is equipped with 5 relay outputs and 9 sensor inputs, connections for digital Grundfos direct Sensors, and PWM outputs for speed control of energy-saving high-efficiency pumps. With the integrated SD card slot, logging system data and updating the firmware is possible. Additional accessories as well as up to two em extension ...

    By Resol GmbH based in Hattingen, GERMANY. from Solar and Heating Controllers Product line

  • Solar Strut - Solar Heating Mounting System

    SunEarth’s versatile Solar Strut mounting hardware is the contractor’s clean-line choice for mounting either SunEarth flat plate collectors or PV modules.   Solar Strut comes in standard 20′ and 25′  clear or bronze anodized lengths.  The profile is available ...

    By SunEarth based in Fontana, CALIFORNIA (USA). from Solar Heating Mounting Product line

  • Ritter Gruppe - Collecting Box and Heat Transfer Unit

    The insulated collecting and distribution pipes are located inside the collecting box.The advance or return connection can take place alternatively on the left of or on the right.In each evacuated tube there is a U pipe with direct flow-through that is connected in such a way to the collecting or distribution pipe that each individual evacuated ...

    By Ritter Gruppe based in Karlsbad, GERMANY. from OEM Solar Products Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you