Only show results available in Texas? Ok

Medium Wind Power equipment for Wind Energy

  • Senvion - Model 2.XM Series - Wind Turbine

    The 2.XM series offers a choice of 4 models designed to reliably generate high yields at low to medium wind speed sites. With rated output ranging from 2.3 to 2.4 MW, hub heights from 90 to 120 m and rotor diameters from 109 to 124 m, the series provides the versatility to meet a wide range of specific site requirements, regulatory demands and ...

    By Senvion S.A. based in Hamburg, GERMANY. from Wind Turbines Product line

  • Northwind - Model 100 - Wind Turbine

    The Northwind 100 wind turbine gives economical, reliable power to grid connected systems all over the world.  Rated at 100 kW the Northwind 100 utilises the best technology available today, incorporating a permanent magnet generator and gearless design, maximizing the return on investment on small to medium sized wind energy projects.

    By Altergen Ltd. based in Shrewsbury, UNITED KINGDOM. from Wind Turbine Product line

  • Gamesa - Model G80 - Multi-megawatt Wind Turbine

    The track record built up coupled with deep knowledge of current market demands has enabled Gamesa to continue to add the finest technology developments to its 2.0-2.5 MW platform, bringing significant innovation in terms of design, product and performance. The key characteristics of the Gamesa 2.0-2.5 MW platform are its robustness, stellar ...

    By Siemens Gamesa Renewable Energy based in Madrid, SPAIN. from Wind Turbines Product line

  • aeroMaster - Model aM 2.5/103 - Wind Turbine

    With its 103 m rotor diameter and design for TC2A wind conditions, aeroMaster 2.5/103 meets the highest demands concerning energy yield and operational safety and is designed for operation at medium wind speeds. Because hot climate and cold climate conditions were taken into account in its design, the aeroMaster is ideally suited for reliable ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbines Product line

  • Nclave - Model SP240 - Twin Solar Tracker

    Nclave designs, calculates and manufactures solar trackers according to customers’ specifications and standards applicable in each country. Nclave uses the most advanced engineering calculation and simulation software approved by aerospace and automotive industries quality standards. Regarding our manufacturing, Nclave stands out for: ...

    By Nclave based in Madrid, SPAIN. from Twin Tracker SP240 Product line

  • Model V136-4.2 MW - Medium Wind Turbines

    The V136-4.2 MW is designed for medium wind sites. It boosts performance by 11 percent compared to V136-3.45 MW and reaches a class leading 103.9 dB(A) max sound power level, enabling permitting and realisation of wind projects in sound critical areas.

    By Vestas Wind Systems A/S based in Aarhus N, DENMARK.

  • Model V136-3.45 MW - Wind Turbines

    V136-3.45 MW combines Vestas' most advanced aerofoil design to date with the proven 4 MW nacelle and Large Diameter Steel Tower (LDST) technology, to deliver high and efficient energy production in low- and medium-wind conditions. The aerofoil design, applied to the 66.7m long blades, enables a 16 percent* increase in annual energy production ...

    By Vestas Wind Systems A/S based in Aarhus N, DENMARK.

  • GE - Model 2.2-2.4 MW - Platform Wind Turbine

    GE’s 2.2-2.4MW, 107m rotor wind turbine is an advanced evolution of the 1.x series, providing a 35% increase in Annual Energy Production (AEP) over its predecessor, the 1.85-87 (at a 2.4 rating). Designed for medium wind speeds, the 2.2-2.4MW turbine provides a 51% increase in swept area with the 107m rotor, and an extra 350-450 kW output at ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • FusionDrive - Medium-Speed Permanent Magnet Generators

    The most compact medium-speed solution available on the market today, FusionDrive®, utilizes the same frame for both the generator and gearbox. FusionDrive® is the result of bringing together the world-class wind power technology of Moventas, one of the industry’s leading wind gear manufacturers, and The Switch. The generator active ...

    By The Switch - a Yaskawa company based in Helsinki, FINLAND. from Wind - Permanent Magnet Generators Product line

  • Nclave - Model SP160 - Grid-Powered Solar Tracker

    Nclave calculates, designs and manufactures solar trackers according to customers specifications and standards that apply in each country. Nclave uses the most advanced engineering calculation and simulation software approved by aerospace and automotive industry quality standards. Regarding our manufacturing, Nclave stands out for: High-volume ...

    By Nclave based in Madrid, SPAIN. from Solar Tracker SP160 With Rotary Module Or Linear Actuator Product line

  • APS - All Vacuum Tubes Solar Collector

    Generally, there are two patterns: the pattern of horizontal composition and the pattern of vertical composition.

  • Gamesa - Wind Turbines

    The track record built up coupled with deep knowledge of current market demands has enabled Gamesa to continue to add the finest technology developments to its 2.0-2.5 MW platform, bringing significant innovation in terms of design, product and performance. The key characteristics of the Gamesa 2.0-2.5 MW platform are its robustness, stellar ...

    By Siemens Gamesa Renewable Energy based in Madrid, SPAIN. from Wind Turbines Product line

  • BENZ - Model PMG DD 100kW - Direct Drive Permanent Magnet Wind Turbine

    This amazing Direct Drive, Permanent Magnet Wind Turbine is specially designed for low and medium wind speeds and applies the latest design in wind turbine technology. The direct drive, permanent magnet design guarantees reliable performance, efficiency, convenient transport easy installation and most importantly, very low maintenance.

    By MyWindPowerSystem Ltd based in Temple Quay, UNITED KINGDOM. from Wind Turbine Product line

  • Windflow - Model 33-500 - Wind Turbine

    The 33-500 is Windflow's flagship turbine.  With a rated power of 500 kilowatts (kW) and a rotor diameter of 33 meters, it is a turbine that can make your project on a high to medium wind site a financial success.  There are more than one hundred 33-500 turbines in the world, and collectively they have accumulated over 600 ...

    By Windflow Technology Ltd based in Sydenham, NEW ZEALAND.

  • ANew - Model B1 - Vertical Axis Wind Turbine

    ANew-B1 is a large-size vertical axis wind turbine. Rated at 1500 kilowatts, this large VAWT is a culmination of years of research and development by ANew Institute. This vertical wind turbine offers unparalleled power generation rates. As a large VAWT, it combines natural advantages of vertical axis wind turbines with large energy production ...

    By ANew Institute based in Kraków, POLAND.

  • Model 60kw - Northern Power Systems

    Northern Power Systems have over 30 years of experience developing and manufacturing advanced, innovative wind turbines.  The company’s next generation wind turbine technology is based on a vastly simplified architecture that utilizes a unique combination of permanent magnet generators and direct-drive design. The turbine ...

    By Capture Energy Ltd. based in Redruth, UNITED KINGDOM.

  • Model 100kw - Northern Power Systems

    Northern Power Systems have over 30 years of experience developing and manufacturing advanced, innovative wind turbines.  The company’s next generation wind turbine technology is based on a vastly simplified architecture that utilizes a unique combination of permanent magnet generators and direct-drive design. The turbine is available ...

    By Capture Energy Ltd. based in Redruth, UNITED KINGDOM.

  • Medium Wind Turbines

    You can rely on our experience to give you the very best support and service every step of the way from your initial enquiry through to planning assistance, installation, commissioning and management of your new wind turbine. - See more at: http://www.dulas.org.uk/wind-info.cfm#medium_wind_turbines

    By Dulas Ltd based in Machynlleth, Powys,, UNITED KINGDOM. from Wind Product line

  • Nclave - Model SP160 - Self-Powered Solar Tracker

    Nclave designs, calculates and manufactures solar trackers according to customers specifications and standards that apply in each country. Nclave uses the most advanced engineering calculation and simulation software approved by aerospace and automotive industry quality standards. Regarding our manufacturing, Nclave stands out for: High-volume ...

    By Nclave based in Madrid, SPAIN. from Solar Tracker SP160 With Rotary Module Or Linear Actuator Product line

  • Soga - Model PMG - 3 Phase Multi-Pole Low/Medium Speeds Alternators

    Sogaenergies is the leader in Italy for the small wind industry. EV generators represent essential components to compete in international markets with technology and innovation for a better, green world.

    By Soga Energy Team S.p.A. based in Montecchio Maggiore - VI, ITALY. from Alternators Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you