Applications available in Cape Verde
-
Premium
Environment Chambers for Electronics
Automotive, Battery Testing, Cables And Wires, Explosive ...
By Aralab based in Albarraque, PORTUGAL.
-
Groundbreaking Direct Hydraulic Drive Technology for Semiconductors and Electronics
AUTOMATION TECHNOLOGY FOR THE SEMICONDUCTOR AND ELECTRONICS INDUSTRY. The semiconductor industry is engaged in the design and fabrication of semiconductors and semiconductor devices such as integrated circuits. The semiconductor and electronics manufacturing industry have a very special set of automation needs, including mechatronic modules designed for smooth motion during wafer handling, non-contact material transport through the process chambers and nano-meterscale positioning accuracies. Our wealth of ...
By Hägglunds based in Mellansel, SWEDEN.
-
Fiberglass Reinforced Plastic (FRP) Equipment for Semiconductor or Microelectronics Industries
Semiconductor or microelectronics industries have specific high requirement for their production processes, including storage, handling and processing of mediums such as hydrochloric acid, hydrofluoric acid, phosphoric acid, sulfuric, nitric and so ...
By Zhongyi GRP Industrial based in Jizhou, CHINA.
-
Cleaners for Semiconductors/electronics industry
Our cleaners are used in the manufacturing of semiconductors, flat panel displays, CDs, DVDs, and many other electronic items. They remove emulsions, particulates, oil, organic and inorganic contaminants from quartz, wafers, glass, silicon, ceramics, and metals. When rinsed properly our products leave no residue and your precision parts are ready for further ...
By International Products Corporation based in Burlington, NEW JERSEY (USA).
-
Fiberglass for Electroinsulating Materials
STEKLONiT offers fiberglass, corresponding to russian standards and products of world standards, used in the production of electrical insulating materials - prepregs, glass fabric based laminates, printed circuit boards. Fiberglass fabrics produced by STEKLONiT are made of their own glass fibers, which ensures full quality control of their production and guarantees high performance of finished products. Electrical insulation fabrics produced by STEKLONiT are supplied in Russia and abroad. ...
By Steklonit JSC based in Moscow, RUSSIA.
-
Static Frequency Converter for Isolate Frequency Converter Fault
Induction motor powered by frequency converter may require additional testing following a fault identified as a stator related anomaly. If the inner phase insulation is damaged or weak, the rapid voltage rise seen from many frequency converters can result in inner phase currents sufficient to cause the frequency converter failure. This article is designed to give the analyst additional motor circuit evaluation test data, using the motor circuit evaluation for de-energized testing, to better isolate the cause of ...
By Frequency Converter based in Chicago, ILLINOIS (USA).
-
e-commerce businesses solutions for electronic products sectors
Numerous devices used in everyday life are manufactured using electronic components. Nearly every industrial product has an electronic device in it. With the development of electronics every day, devices such as white goods, computers and mobile phones are developed and many different types of products are produced. All of these products are available in our ...
By Atsco Global Trading based in Luton, UNITED KINGDOM.
-
Laser Technology for Electronic
We utilize cutting-edge innovations in laser technology to develop our highly efficient and reliable processing systems for the Electronics industry. Ultrashort pulse laser technology guarantees optimum process results for drilling, scribing, cutting and structuring of PCB materials, ceramic substrates and semiconductor ...
By InnoLas Systems GmbH based in Krailling, GERMANY.
-
Catalytic Heaters for Curing and Drying Industry
Applying the infrared principle with catalytic gas fired emitters is simply the most efficient method for drying and curing coated parts. Unlike convective systems, which heat the air, catalytic heaters emit IR energy directly to the substrate which is absorbed rapidly by the coating. There is an immediate temperature rise which initiates the gel stage within the 1st few minutes of exposure. Full cure times are dramatically reduced, generally by 50 to 80%. Your actual benefit can be determined beforehand by ...
By American Catalytic Technologies based in Clinton, CONNECTICUT (USA).
-
Static Frequency Converter for Gas Turbine Industry
Actually in the plant the generator, compressor, gas turbines are all on a single shaft. I have a doubt that if we are using static frequency converter then we can start with giving low frequency to the stator... and if the frequency is low then can magnetic locking between stator and rotor can take place directly (without excitation) and after that we can increase the frequency to stator & after reaching say 75% speed the turbine will be self-sustaining and the static frequency converter supply can be cut off ...
By Frequency Converter based in Chicago, ILLINOIS (USA).
-
Laboratory X-Ray Solutions for Semiconductor & Electronics
The sensitivity of the AttoMap microXRF enables quantitative analysis of trace levels of dopants in FinFETS and has demonstrated down to 2 nm thickness of high-k dielectric films at 1% repeatability. Acquisition is non-destructive and can be performed within seconds. Ultimate sensitivity for dopants such as Ni, La, Hf, etc. ...
By Sigray, Inc based in concord, CALIFORNIA (USA).
-
Profiles and Rods for Electronics
STEKLONiT offers profiles and rods for the manufacture of electrical insulating equipment. High requirements for such products are successfully implemented in our production, which has many years of experience with the electrical industry. Rods and profiles can be manufactured in various shapes and diameters as per customer requirements. Products are delivered anywhere in the world. ...
By Steklonit JSC based in Moscow, RUSSIA.
-
eCommerce for B2B Electronics Distributors and Wholesalers
Build a future proof digital channel tailored to the industry's needs. Some within the B2B electronics distribution industry still find it difficult to start a B2B eCommerce store for fear of upsetting existing distribution channels and processes. However, more and more distributors are moving away from traditional selling methods and strategies to embracing agile, growth- and customer-centric approaches. This means investing in supply chain digitalization and eCommerce platform for ...
By Oro Inc based in Los Angeles, CALIFORNIA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you