- Home
- usa oregon
- Applications
Refine by
Energy Applications For The Served Air And Climate Industry Available In In Usa Oregon
13 applications found
Premium
Waste Type: Synthetic (Ethanol). Objective: To model the methane produced from acetate and from hydrogen in cultures receiving ethanol as an input substrate. The objective was to verify the accuracy of models developed on the basis of substrate ...
ByChallenge Technology based in Springdale, ARKANSAS (USA)
Premium
Combustion in boilers, gas turbines, waste to energy, paper-mills, minerals, etc. | MIR 9000e Customer: Any industry having a stake in improved combustion technologies Material measured: Combustion flue gases Installation: At the boiler outlet Function: Reliable and accurate monitoring of O2 and CO for combustion control optimization ...
ByENVEA based in Poissy, FRANCE
Carbon capture at the stack in waste-to-energy facilities involves a sophisticated strategy to reduce and mitigate carbon emissions released during the energy generation ...
ByThe Hoskinson Group, LLC based in Jacksonville, FLORIDA (USA)
Example: Aluminium recycling. Similar tasks: Recycling of copper, lead, ...
ByCTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based in Graz, AUSTRIA
Hot process gas is required for the start-up or running of many production plants, in the refinery as well as in petrochemical plants and in the minerals industry. CS can offer hot gas generator systems for almost all applications. Many years of experience in the firing sector, as well as tailor-made solutions, which are tested for the most complex applications by using CFD, make it possible to supply optimum complete systems for the customer. No matter whether the process gas has to be provided at 100°C, ...
ByCS Combustion Solutions GmbH based in Wien, AUSTRIA
Nitrogen as a sealing gas to prevent explosions. Turbo compressors are used to compress large gas flows. They are used in petrochemical plants and refineries, for example. In this context, their task is to increase the pressure in gas pipelines. Nitrogen can be used as a sealing gas in turbo compressors. It is used to blanket the mechanical seal, which seals the rotating shafts against the machine housing. This prevents the process gas from penetrating the engine and prevents any ignition of the ...
ByInmatec GaseTechnologie GmbH & Co. KG based in Herrsching, GERMANY
The value of applying turbulators in air heaters and radiant tube heaters is known for decades. With more stringent efficiency norms such as the new Eco-design, its use is becoming more and more popular. With turbulators the desired efficiency can be obtained with a considerable smaller heater ...
ByJD Turbulators B.V based in Raamsdonksveer, NETHERLANDS
Typical applications of the Caloperm Heat Exchanger: Petrochemical industry, process industry, air treatment, hydrogen technology, chemicals from a as ammonia to potassium solution and x as xylene, power industry, ...
ByCaloperm GmbH based in Niederlehme, GERMANY
The objective of the Carbon-Negative Waste-to-Energy Park strategy goes beyond achieving carbon neutrality as it actively strives to surpass it. It achieves this by removing and sequestering more CO2 than the entire process emits. This approach comprehensively addresses emissions from various sources, such as waste management, energy generation, and auxiliary processes, thereby ensuring a net-negative carbon ...
ByThe Hoskinson Group, LLC based in Jacksonville, FLORIDA (USA)
Claus plants are used to convert H2S from natural gas and crude oil into liquid sulphur. For this purpose, the H2S-containing waste gas (Claus gas) is burnt sub-stoichiometrically in several stages, depending on the ...
ByCS Combustion Solutions GmbH based in Wien, AUSTRIA
Example: Electrical industry. Similar tasks: Electronic industry, Coating, Waste ...
ByCTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based in Graz, AUSTRIA
Measure and monitor your oxygen flow, pressure, temperature, and dew point, with VPInstruments oxygen sensors. Get insight into your oxygen consumption and optimize your system, monitor your consumption and allocate flow over your distribution network. VPInstruments’ sensors for oxygen are highly reliable and easy-to-use. We help manufacturers of oxygen generators, technical gas suppliers, oxygen infrastructure (piping, installation) companies, and end customers to respond to current increased ...
ByVPInstruments based in Delft, NETHERLANDS
Example: Production of synthetic resin. Similar tasks: Chemical industry, batch processes in the pharmaceutical and plastics ...
ByCTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based in Graz, AUSTRIA